I did use Johns web app and it came up with the same values as the draws manager.

#wsjt-x

™ Manager (Footer) No Case.

#yaac #replacecompass #draws #install #js8call

DRAWS™ Manager is at https://github.com/nwdigitalradio/draws-manager

#yaac #replacecompass #draws #install #js8call

I think Im doing something wrong I have used the draws manager and no transmit ## Symptoms - receive work - Nothing on ALC meter when I tune with WSJT-X ## Hardware - Yaesu FT-817 -

#wsjt-x

My draws-manager has the other radio port OFF and I have set TX audio levels based on the mW p-p value of my radio (60).

#draws

I am using DRAWS software version "DRAWS_BETA13" from May 7, 2019. I connected to DRAWS MANAGER and set the receive & transmit levels there.

Hmm, I installed and ran DRAWS Manager from source, and set my ALSA settings using its presets.

p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,30031339 Since you have a Pi 4 you may need to install from source https://github.com/nwdigitalradio/draws-manager

Try DRAWS ™ Manager It should set levels properly.

I think I spent a bunch of time on device settings in Draws Manager when all I had to do is find another gateway system.

#paclink-unix #pac-link

Try measuring your deviation. https://www.febo.com/packet/layer-one/transmit.html You can send a tone using the measure_deviate.sh script found here: n7nix/deviation Use John's draws-manager

#paclink-unix #pac-link

I've found that I need to run the `setalsa-ft817.sh` script that was included in the ~/bin directory, after that, I opened the DRAWS Manager and changed the Input from Receiver Signal

Forgot to include my DRAWS manager screenshot! Cheers, Matt - N7ROO

#ft-891 #draws #ft-8 #wsjtx

I've included a screenshot of the DRAWS Manager settings and have attempted sending both prior to and after configuration. I've also confirmed that Direwolf is not running.

#ft-891 #draws #ft-8 #wsjtx

Ken, did you look at Draws manager? That has output adjustments . Also the power slider on the right of the wsjt-x screen can be adjusted. Rick. Ka4ohm

Did you try DRAWS ™ Manager? https://youtu.be/v5C3cWVVz_A You may want to also do a factory reset on the radio.

/udrcver.sh Found a DRAWS HAT ID EEPROM Name: hat Product: Digital Radio Amateur Work Station Product ID: 0x0004 Product ver: 0x0405 UUID: 3036072f-20a8-441c-9901-4e8abec0fab4 Vendor

#earlyadopter #beta13

Have you checked the draws manager and make sure AF (pin5) for your channel. Also make sure Direwolf is not running cd cd bin sudo su ./ax25-stop Tim / AG6RS

#ft-891 #draws #ft-8 #wsjtx

In DRAWS™ Manager, try the default settings for the FT-817 and make small changes from there.

I have tried moving the sliders all over in DRAWS manager and playing with digital gain on the radio itself. All to no avail.