|
Question on DRAWS™ Manager
/bin_refresh.sh # Confirm you are not running a buggy kernel buginfo.sh # Now start draws manager mgr-ctrl.sh start # check the status mgr-ctrl.sh status # Paste console output of all
/bin_refresh.sh # Confirm you are not running a buggy kernel buginfo.sh # Now start draws manager mgr-ctrl.sh start # check the status mgr-ctrl.sh status # Paste console output of all
|
By
Basil Gunn
· #5565
·
|
|
Question on DRAWS™ Manager
Thanks John, Output attached. Hope it makes sense. KD4IZ Jack Spitznagel FM19oo
Thanks John, Output attached. Hope it makes sense. KD4IZ Jack Spitznagel FM19oo
|
By
Jack Spitznagel
· #5564
·
|
|
Question on DRAWS™ Manager
That should have done it, run sudo systemctl status draws-manager for basic diagnostics.
That should have done it, run sudo systemctl status draws-manager for basic diagnostics.
|
By
John D Hays - K7VE
· #5563
·
|
|
Question on DRAWS™ Manager
The unit is on the network, can be seen by the network hub manager and the cable gateway. Just no DRAWS manager connection to 10.0.0.225:8873 (or the original 8080).
The unit is on the network, can be seen by the network hub manager and the cable gateway. Just no DRAWS manager connection to 10.0.0.225:8873 (or the original 8080).
|
By
Jack Spitznagel
· #5562
·
|
|
Question on DRAWS™ Manager
You do need to restart DRAWS™ Manager after editing the file. sudo systemctl restart draws-manager
You do need to restart DRAWS™ Manager after editing the file. sudo systemctl restart draws-manager
|
By
John D Hays - K7VE
· #5561
·
|
|
Question on DRAWS™ Manager
From the draws-manager README https://github.com/nwdigitalradio/draws-manager "If you want to set the port, edit /etc/default/draws-manager and add a line with the port number, e.g
From the draws-manager README https://github.com/nwdigitalradio/draws-manager "If you want to set the port, edit /etc/default/draws-manager and add a line with the port number, e.g
|
By
Basil Gunn
· #5560
·
|
|
Question on DRAWS™ Manager
Unfortunately, HamClock wants to grab port 8080 too, so I can’t connect to the DRAWS Manager interface.
Unfortunately, HamClock wants to grab port 8080 too, so I can’t connect to the DRAWS Manager interface.
|
By
Jack Spitznagel
· #5559
·
|
|
kernel headers and the hold on kernel
manager web app mgr-ctrl.sh stop # After every boot check that the driver loaded properly buginfo.sh Joe, KO8V <jgdevince@...> writes:
manager web app mgr-ctrl.sh stop # After every boot check that the driver loaded properly buginfo.sh Joe, KO8V <jgdevince@...> writes:
|
By
Basil Gunn
· #5522
·
|
|
Case Arrived! Screw size?
I just ordered one of the new design for the later generation DRAWS board. One issue: my Rpi was reporting via the DRAWS manager that CPU temp reach 140+ F.... not wonderful...
I just ordered one of the new design for the later generation DRAWS board. One issue: my Rpi was reporting via the DRAWS manager that CPU temp reach 140+ F.... not wonderful...
|
By
Jack Spitznagel
· #5421
·
|
|
Complete how to information
Interestingly, I can bring up the DRAWS manager from the remote computer right after the DRAWS system has been started with XASTIR and HamClock running... so it is an odd finding and
Interestingly, I can bring up the DRAWS manager from the remote computer right after the DRAWS system has been started with XASTIR and HamClock running... so it is an odd finding and
|
By
Jack Spitznagel
· #5393
·
Edited
|
|
Audio setup problem with Raspberry PI and DRAWS hat.
#ft-817
#audio
#drawsmanager
#draws-manager
#wsjt-x
I followed instructions from the web to run the DRAWS-Manager web app and set both channels to the recommended values for the pin 5 data and saved the settings. 10.
I followed instructions from the web to run the DRAWS-Manager web app and set both channels to the recommended values for the pin 5 data and saved the settings. 10.
|
By
jakob@...
· #5380
·
|
|
Audio setup problem with Raspberry PI and DRAWS hat.
#ft-817
#audio
#drawsmanager
#draws-manager
#wsjt-x
I ran the Draws-Manager several time und tried on both ports with saving the settings, using the recommended settings for the FT-817 AF.
I ran the Draws-Manager several time und tried on both ports with saving the settings, using the recommended settings for the FT-817 AF.
|
By
jakob@...
· #5373
·
|
|
HDMI issue with Draws
hdmi_drive=2 Here is the output from head -n1 /var/log/udr_install.log.... 2020 12 04 13:45:55 PST: SD image version: nwdr18 and udr_install.log.... 2019 09 19 14:30:00 PDT: install.sh: draws-manager
hdmi_drive=2 Here is the output from head -n1 /var/log/udr_install.log.... 2020 12 04 13:45:55 PST: SD image version: nwdr18 and udr_install.log.... 2019 09 19 14:30:00 PDT: install.sh: draws-manager
|
By
W8GMC
· #5367
·
|
|
New to DRAWS - what order to troubleshoot installation/setup?
#draws-manager
#ft-817
#ft817
#draws
#gps
The following post describes what you need to do to get draws-manager running with the latest NWDR18 image. https://nw-digital-radio.groups.io/g/udrc/message/5311 Chrony has been working
The following post describes what you need to do to get draws-manager running with the latest NWDR18 image. https://nw-digital-radio.groups.io/g/udrc/message/5311 Chrony has been working
|
By
Basil Gunn
· #5316
·
|
|
New to DRAWS - what order to troubleshoot installation/setup?
#draws-manager
#ft-817
#ft817
#draws
#gps
I already ran through the "fix" for the new image version, which states the draws-manager web app is disabled: https://nw-digital-radio.groups.io/g/udrc/message/5111 I see from your
I already ran through the "fix" for the new image version, which states the draws-manager web app is disabled: https://nw-digital-radio.groups.io/g/udrc/message/5111 I see from your
|
By
Microbes
· #5315
·
|
|
New to DRAWS - what order to troubleshoot installation/setup?
#draws-manager
#ft-817
#ft817
#draws
#gps
p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,76528127 # To install the latest version of draws-manager cd cd n7nix git pull cd manager sudo su .
p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,76528127 # To install the latest version of draws-manager cd cd n7nix git pull cd manager sudo su .
|
By
Basil Gunn
· #5314
·
|
|
Can't access Draws Manager
You should turn DRAWS™ Manager off when not in use. It is basically a configuration application. You can use systemctl to turn it on and off.
You should turn DRAWS™ Manager off when not in use. It is basically a configuration application. You can use systemctl to turn it on and off.
|
By
John D Hays - K7VE
· #5312
·
|
|
Can't access Draws Manager
Ran this script: cd cd n7nix git pull cd manager <---- you didn't do this sudo su ./install.sh Now I have Draws manager running.
Ran this script: cd cd n7nix git pull cd manager <---- you didn't do this sudo su ./install.sh Now I have Draws manager running.
|
By
Tim Huffaker
· #5311
·
|
|
Can't access Draws Manager (slightly off topic)
Basil, Thanks for the explanation. Daniel
Basil, Thanks for the explanation. Daniel
|
By
Daniel VE3NI
· #5310
·
|
|
Can't access Draws Manager (slightly off topic)
This is exactly right. This will get almost all of the contents of the latest image. I try to keep everything updated via scripts. If you are using some of the HF programs you should also do: cd cd n7
This is exactly right. This will get almost all of the contents of the latest image. I try to keep everything updated via scripts. If you are using some of the HF programs you should also do: cd cd n7
|
By
Basil Gunn
· #5309
·
|