If you skip that update the kernel is at "4.19.118-v7+" Charlie

#drawsmanager

Basil - that includes the "Welcome to Raspberry Pi" automated configuration where it asks to update Software as well, correct? Charlie

#drawsmanager

Okay, start over from scratch it is! A little repetition never hurt the learning curve! Thanks, Charlie

#drawsmanager

The sensors command (along with a bunch of other things) is not working in kernel 5.4.51, that is what is causing draws-manager to fail.

#drawsmanager

Jul 29 11:31:35 nvdpi systemd[1]: Started DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration..

#drawsmanager

Could you please post the console output of these 2 commands: uname -a journalctl -u draws-manager.service Thanks, /Basil n7nix Charlie Hein <chein@...> writes:

#drawsmanager

No, problem. Been there, done that and am still there more often than I care to admit. Gayland KG7GCF

#drawsmanager

OH! Thanks for the grace applied to my ignorance, Gayland! John: Here is the output: pi@nvdpi:/etc $ cd pi@nvdpi:~ $ which node /usr/bin/node pi@nvdpi:~ $ which npm /usr/local/bin/npm pi@nvdpi:~ $ Cha

#drawsmanager

Charlie, I believe, John is asking you to run "which node" and "which npm" commands, which is a program that tells you if these programs are installed. Gayland KG7GCF

#drawsmanager

I'm not sure I follow, John. "What is the response to which node which npm" Are there specific commands I should know? Charlie

#drawsmanager

What is the response to which node which npm

#drawsmanager

Here's the output from the command: pi@nvdpi:~ $ sudo systemctl status draws-manager ● draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ Loaded: loaded

#drawsmanager

Look at the output of systemctl status draws-manager

#drawsmanager

Watched the Demo Video, got excited, but when I try to run draws-manager from either a desktop or localhost, I get this: I've tried stopping and restarting draws-manager to no avail

#drawsmanager

The very first thing I did when I re-checked it just now was to update the DRAWS manager “just in case”.

#sensors #adc

Make sure you have an updated draws-manager (left menu)

#sensors #adc

Jack, I just ran DRAWS Manager with the updated config and it works fine.

#sensors #adc

Bryan, Quick Question on that: Has John implemented this in the DRAWS Manager? Does not appear to be the case.

#sensors #adc

Please carefully read the following: - draws-manager README.md here https://github.com/nwdigitalradio/draws-manager On a new NWDR image this program is already installed & running.

I used the spreadsheet and got bogged down trying to use draws-manager.

#ax25 #ft-8900