The mini-6 din has what is needed to make a “cable” to the mic and headphone jacks on the KX3. You can also make a plug for the 4 x 2 connector on the DRAWS with a RS-232 level shifter chip to drive t

Thank you Annaliese. I have been writing OS’s and device drivers for more years than I like to think about. You have given me what I think I need and I won’t bug you. I will make anything I get going

This gets a 404 error - you might want to upload it to BitBucket or GitHub. 73 - Frank - K0FEI

#betaimage #draws

Hi Lars You can fix the loading of js8call and wsjtx by using sudo apt-get install ./$findname instead to sudo dpkg -I $filename. Apt will resolve the missing dependencies. It just needs to know it is

#yaac #replacecompass #draws #install #js8call

Hi Jon, Can you tell me where you got the snd-soc-tlv320aic32x4-i2c.ko file and do you also need UDRC and snd-soc-tlv320aic32x4.ko? Is there a ax25.ko? Where do you put those files in /lib/modules? Di

#draws

I have uploaded a new 3D printable DRAWS case to Thingiverse https://www.thingiverse.com/thing:3783961. This is a case for Raspberry Pi 3b or Raspberry Pi 4b + NWDR DRAWS hat with GPS port on side. It

Hi John and all, I have tried everything listed above on both a Pi3 and Pi4. I can not see the sound card or the gps or even the sensor data. Can someone do a new step by step or better still a video.

#yaac #replacecompass #draws #install #js8call

Hi John, My results were not successful. I am using a Pi 4 - 2gb memory with the Buster downloaded today. I did not turn on anything except to connect to wifi. After the install I did enable ssh. unam

#yaac #replacecompass #draws #install #js8call

Hi John, One thing more - I do see the hat ./udrcver.sh Found a DRAWS HAT ID EEPROM Name: hat Product: Digital Radio Amateur Work Station Product ID: 0x0004 Product ver: 0x0204 UUID: 2420cda1-931d-478

#yaac #replacecompass #draws #install #js8call

Hi John, I followed your steps exactly,. The second post was some additional info to show that I could read the EEPROM and thus the hardware was working. I think there is a problem that the drivers ar

#yaac #replacecompass #draws #install #js8call

Hi John, If you would like to take this offline - my email address (at least the one in QRZ) is k0fei@.... Frank

#yaac #replacecompass #draws #install #js8call

Hi John, Yes - I rebooted as instructed. I rebooted after doing the updates. I rebooted after running the install_image. As listed in the earlier post the aplay -l just talks about the bcm2835 ALSA de

#yaac #replacecompass #draws #install #js8call

Hi John, I tried using a raspberry pi 3B and the same thing. The aplay -l command did not return the card1 info. This is beginning to look like a case of I can't get there from here. Maybe someone els

#yaac #replacecompass #draws #install #js8call

Hi John, Decided to try again with new SD card and all. 1. Downloaded Buster 2019-07-10-raspbian-buster.img 2.Got new SanDisk Extreme 64 gig SD out of package. 3. Used Etcher to flash image. 4. Booted

#yaac #replacecompass #draws #install #js8call

Hi John, I don't think the dist-upgrade makes any difference but I'll try again. Frank - K0FEI

#yaac #replacecompass #draws #install #js8call

Hi Mike, I am powering through the Pi not the 12 volts, but I don't think that makes any difference as long as the power supply is not being maxed out. I have tried using the 12 volts in the past. Fra

#yaac #replacecompass #draws #install #js8call

Hi John, I redid it using sudo apt upgrade - no difference. Maybe the best way forward, since you guys can get it to go, would be to just have you guys make a buster image ready to go for the Pi4 and

#yaac #replacecompass #draws #install #js8call

Hi Jonathan, Are you using the hat with the gps antenna on the side with the sockets or on the back of the card? Thanks Frank - K0FEI

#yaac #replacecompass #draws #install #js8call

Hi Jonathan, Could you look at a couple of things and tell me what you are seeing. 1. Could you enter sudo lsmod. That should display a list of kernel modules loaded. 2. Could you cat /boot/config.txt

#yaac #replacecompass #draws #install #js8call

Hi Basil, Just adding the lines to /boot/config.txt didn't get the tlv modules to load and I could not see the sound card. If I put those lines before the drtparam=audio=-on then aplay -l said there i

#yaac #replacecompass #draws #install #js8call