Hi Michael, If you are not familiar with all of the workings of CODEC chip, it is best not to use alsamixer or similar tools to configure settings. The DRAWS™ Manager is designed to control the select

#fldigi #audio #cat #configuration #cw

What? Why a dispute, just contact sales@... if you have a return request.

#wsjt-x

The FT-817 is probably the most tested for the DRAWS™ HAT. Are you using the left DIN-6 port and selecting the same in your program? There is a possibility that one of the flags in the CODEC was set i

#wsjt-x

And make sure the lines are added at the end of /boot/config.txt in that order. dtoverlay=draws,alsaname=udrc force_turbo=1

#yaac #replacecompass #draws #install #js8call

https://nw-digital-radio.groups.io/g/udrc/files/DRAWSTech.pdf

Stretch is the best path for Pi 3 and Pi 2. If you have a Pi 4, you will need to use Buster and the edit that Basil lists. Now that the DRAWS™ support is directly in the Buster kernel, it is configura

#yaac #replacecompass #draws #install #js8call

I have had both recognized with the Buster version.

#yaac #replacecompass #draws #install #js8call

What radio model are you trying to drive?

#wsjt-x

Hi Corky, The current "buster" seems to work fine at my place with the N7NIX script. I find clean installs work best, but Pi 4/Buster are still leading edge.

#yaac #replacecompass #draws #install #js8call

The main difference I see, and may be the culprit is the sudo apt dist-upgrade The dist-upgrade may be introducing the conflict, I just do an upgrade.

#yaac #replacecompass #draws #install #js8call

I took the commands I provided, directly from my shell history One additional command I gave 1st was sudo apt install git build-essential vim nmap (before running the git clone and script) just to mak

#yaac #replacecompass #draws #install #js8call

Frank, I did the install on 3B+, so I needed unpack and setup a Pi 4 (4GB) to verify it ran there as well. I just moved over the SD Card to test. Installation (using the 3B+) git clone https://github.

#yaac #replacecompass #draws #install #js8call

Did you reboot after the steps? Then do the aplay -l? The script is by Basil, N7NIX -- it worked for me.

#yaac #replacecompass #draws #install #js8call

Frank, Between your two emails, I am not sure of your current state. Did you follow the steps I outlined earlier? You should be seeing the card.

#yaac #replacecompass #draws #install #js8call

I did this just yesterday (from memory - not at system right now) Download and burn Buster onto SD Card Let it boot up and update/upgrade sudo reboot sudo apt install git build-essential cd git clone

#yaac #replacecompass #draws #install #js8call

I am not where I can look right now, but seem to recall WSJT (FT8) does not implement GPIO PTT, so you have to use CAT through hamlib or VOX. Fldigi has a setting for GPIO PTT on a tab beyond the CAT

No.

At first blush, what you are describing isn't practical. DMR uses the AMBE vocoder to pass voice communications and it will not reproduce tones for the modems typically used for Winlink communications

#winlink #btech #dmr #draws

https://nw-digital-radio.groups.io/g/udrc/topic/drawstm_manager_demo/30031339?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,30031339 Since you have a Pi 4 you may need to install from source https:/

Try DRAWS ™ Manager It should set levels properly.