Hi, Harware is a RaspBerry Pi 3B with an DRAWS HAT and I am runing HAMPI 1.0 with stretch Linux raspberrypi 5.4.51-v7+ #1333 SMP Mon Aug 10 16:45:19 BST 2020 armv7l GNU/Linux My today challenge is to

dtoverlay= can be at the beginning or later as soon as it is declared first, i.e. before # Enable audio (loads snd_bcm2835) dtparam=audio=on Something is triggered by dtparam=audio that prevent the DR

Hi Bob, I recently ran Hampi and experienced the same kind of issue. DRAWS board was not found while it was ok with the same hardware Rpi + DRAWS when running nwdr16 Linux image. After exchanging /boo

Hi Basil, I performed all instructions you gave and rebooted. However I could not connect to localhost:8080 Hi John, Here it is : root@raspberrypi:/home/pi# ls -l /usr/local/var/draws-manager/webapp t

Hi John, Thanks for the link. I followed instructions but could not log in to Draws-manager. Here ifollows a complete report. 73's Bernard systemctl status draws-manager ● draws-manager.service - DRAW

Hi, Sorry but the video fails to explain how to install Draws-Manager and how to start it. I do not see it on my nwdr15.img installed system. Regards, Bernard, f6bvp

Hi Basil, By chance the solution of file manager sudo apt update sudo apt full-upgrade sudo reboot suggesred by david, Ke7rgp also cured my screen blanking issue ! Anyway, thank you for sharing your s

#desktop

David, Thank you for providing a solution that also worked for me. And thanks to all who confirmed the file manager issue. It’s nice to share problems. This means that something should be repaired in

#desktop

Hi, With nwdr15.img and recently with nwdr14.img I observed same desktop issues on two different Raspberry Pi models 3B+ and 4 and two different screen displays models. These issues are not present on

#desktop

Hi Basil, Your fix works great ! Now ax25-start is ok. Thanks for repairing the bug so fast. 73’s de Bernard

Hi Basil, I downloaded new nwdr15 image and ran initial setup. Then I performed app-config.sh core Following Getting Started Guide I verified ALSA settings with alsa-show.sh and after becoming root su

Hi Basil, I tried your improved script and found that it stopped in the middle at line with tail -1. I had to changed it in order to make the script run. Please find attached diff file. BTW many thank

#nw14

Hi Basil, I installed nwdr15.img and found that AX.25 was running very well using your scripts ax25-start / ax25-stop. In order to complete my system configuration I added a script creating an axudp d

#nw14

With NorthWestDigital radio Debian image nw14, AX25 over UDP is not working. Although configuration is correct there is no frames transmitted nor received via the axudp interface. After reinstalling A

#nw14

Hi Basil, I have another suggestion for your scripts if you agree. One of my experimental Rose/FPAC nodes is only Internet connected, no radio port for the moment although equipped with an UDRCII mode

#fldigi #direwolf

Hi Basil, Once again I thank you very much for your invaluable help for progressing into RaspBerry Pi and DRAWS usage with AX.25. Reading doc files is quite easy but it does not preclude some missinte

#fldigi #direwolf

Hi, I finally installed last image nw14 and DRAWS driver is ok and aplay -l listed the device is present. **** Liste des Périphériques Matériels PLAYBACK **** carte 0: ALSA [bcm2835 ALSA], périphériqu

Hi, Not sure this list is still alive. Due to issues with partially broken libraries in Compass image I decided to burn Buster distro on a RPi 3B with DRAWS HAT. The system is doing well but DRAWS is

Hi Basil, Thanks for the explanations about TLV320 driver in new 4.19.42 kernel. When upgraded it will certainly make an interesting jump. 73 de Bernard f6bvp

Here are my Compass beta 13 current software versions: Linux compass-f6bvp 4.14.98-v7+ #1200 SMP Tue Feb 12 20:27:48 GMT 2019 armv7l GNU/Linux Gnu C 6.3.0 Gnu make 4.1 binutils 2.28 util-linux 2.29.2