Hi Basil, during execution of script n7nix/bin/prog_refresh.sh there is an error at line 111 unknown file or directory cd: split-channels: Bernard --- L'absence de virus dans ce courrier électronique

John, I forgot to mention that transmitted signal used for level adjustment was performed by either n7nix deviation measure deviation script or using direwolf -t 0 -x Bernard

Hi John, I performed audio level adjustment for I found that FTM-100DE VHF transmitted signal from DRAWS modem was spreading around the TX frequency. After adjusment this is the result of alsa-show.sh

Hi Jeff, Additionally I want to point you to WiringPi PIN based GPIO access library written in C. We are using it to access via GPIO a 24 bits multiplexer HAT in a project for controlling our radio te

Hi John, Here my FTM-100DE is quite new and I just ran setalsa-default that made audio receive and transmit levels adequate. For the moment I did not try any deviation measurements. 73 de Bernard f6bv

Hi Jeff, Just try: gpio -h for menu display. For example : gpio readall gpio read 10 Etc... 73 de Bernard f6bvp Le 7 avr. 2019 à 16:53, Jeff Francis™ <jeff@...> a écrit :

Hi, I just want to report the successful use of Data Cable, 10-pin mini-DIN to 6-pin mini-DIN, for FTM-400DR/FTM-100DR, from https://www.dxengineering.com/parts/ysu-ct-164 This lets you use DRAWS hat

Hi Basil, I just found that in beta9 ncursesw5 libraries are only partially installed. I can provide details if needed. Bernard f6bvp

#betaimage

Hi John, Congratulations. DRAWS-manager looks like a very interesting application. However something should be done in order to make it charge less CPU load when run with kernel 4.14.98-v7+ for it use

Hi Basil, I found an old message from Richard Stearn about the order of aplication to kill when performing ax25-down. It may be interesting to take richard's remark for your ax25-down script. Regards

By the way, I wrote a patch for direwolf 1.5-1.6 to give the choice of channel for sending calibration test signal (option -x). This may be useful for the default is only on channel 0 that is right co

Hi, By default direwolf can only send calibration test signal on channel 0 using option -x I submitted a patch for direwolf 1.6 making possible to choose the audio channel : option becomes -x 0 or -x

Hi, With DRAWS I noticed that PBEACON sendto=0 is sending APRS beacon on left DIN6 (CHANNEL 0). This is absolutely correct and in accordance with n7nix measure_deviate.sh deviation script that sends m

I noticed that killing direwolf on Compass Linux beta 1.5, ax.25 interface udr0 and udr1 are removed freeing access to draws sound card. sudo killall direwolf is a quite simple command indeed. Bernard

#configuration #management #draws #direwolf #ax25

Hi David, groups, You may want to test the attached patch for direwolf adding choice of channel to send calibration tones. 73 de Bernard, f6bvp -------- Message transféré -------- Sujet : Re: [PATCH]

Hi Basil, I ran your script verify_time.sh and saw NTP synchronized: no ! Consequently I concluded that my NTP install operation followed by another chrony install introduced some issue. Thus I apt-ge

#ntp #chrony #ntpd

If not already present adding in n7nix install core script could be usefull to perform initial system time adjustment when GPS is not yet switched. This is my case for I did’not put any antenna for in

#ntp #chrony #ntpd

I did not install a battery yet in my DRAWS hat. None of the button batteries I have in stock fits into the case. Could someone give me a model reference or number. Bernard

#ntp #chrony #ntpd

Ok. I reinstalled chrony for it had been removed when installing ntp. This time command systemctl status chrony showed that it was started as ntp client/server and chrony sources command found 6 sourc

#ntp #chrony #ntpd

Hi, I downloaded last available compass beta version today and installed it (beta 5). Just plugged DRAWS hat on RPi 3B+, connected Din6 cable into left din6 plug and YAESU FT-7900 and set APRS frequen