The line above the "log measurements...." statement appears to be fouled up. verify_time.sh script.# Uncomment the following line to turn logging on. Notice the "." following the script command. That

#gpsd

Great, thanks Basil...! /SvW

2021 01 23 09:46:30 PST: SD image version: nwdr19

Basil, You may not recall but early on with the DRAWS board I discovered an issue with the script not setting the IP addresses that the user selected. It always reverted back to 192.168.... default ad

Andrew, The vcgencmd measure_temp command will provide you with the cpu temperature on a stock rasbian image. Happy Trails, Steve, N9VW

My suspicions are that since this is a known issue with the Raspian image then they must have fixed the issue and the update/upgrade pulled in the 'fix'...

#desktop

I have one that is currently sitting waiting for something to do... Let me know, I can get it out in the morning. Happy Trails, Steve, N9VW

JP, If ever there was a teachable moment, this is it..!!! The underlying theme with the DRAWS product is to put the Amateur back into Amateur Radio. You have already done most of the 'hard' part of co

Bryan, I'd be plenty happy with 2 of the original unmodified cases if you happen to have any left. 73 de Steve, N9VW

It may be worth noting that "You MUST make sure to upgrade your Raspbian operating system install to the latest version so that the firmware can support the new chips! Old SD cards from previous relea

Basil, It seems that I was bitten by the upgrade issue as well. Will a notice be sent out to all when it is safe to do an "apt-get upgrade" on the system? Thanks Steve, N9VW

Basil, Here you go. It appears that commenting out the audio fixed the problem. Seems like progress is on the horizon Steve On 4/18/2019 1:31 PM, Bjorn Pehrson wrote:

Basil, Here you go. It appears that commenting out the audio fixed the problem. Seems like progress is on the horizon Steve

Basil, Yes, starting from the Beta 12 image on a new 16G card using BalenaEtcher. I ran chk_conflict.sh and the output from that up to the reboot is in the attachment chk_conflict.txt I ran through th

Hi Basil, I have run through the instructions and loaded two different 16G cards. The initial setup and ax.25 scripts are failing. I went back to Beta 11 and it wall works as expected. 73 de Steve, N9

Thank you Brian! Steve, N9VW

#draws

Wouldn't the almanac become stale as well, say after 6 months? Wouldn't that be about the same thing as a cold start when the system is booted back up? 73 de N9VW, Steve

#ntp #chrony #gps #clock #battery

John, This link still tries to download: http://nwdig.net/downloads/draws_beta2.zip /SvW, N9VW

#betaimage #draws