Hello All, DRAWS Has an on-board ADC to monitor the 12V supply. Sometime after the first run, 5V monitoring was added, but the config file wasn't updated so the sensors command doesn't work correctly.

#sensors #adc

Bryan, Quick Question on that: Has John implemented this in the DRAWS Manager? Does not appear to be the case. At the bottom of current version, the status bar says: Digital Radio Amateur Work Station

#sensors #adc

John will add it to a future release, after he finishes his new home in Kingston WA

#sensors #adc

Great! I missed that he was building. Best success to him! -Jack

#sensors #adc

Got Mangled in the group: #DRAWS uses the TL024 Which is SW Compatible with thw ADS1015 #It's an 8 Channel ADC, but only 4 Channels are pinned out chip "ads1015-*" label in4 "+12V" label in5 "+5V" lab

#sensors #adc

Early adopter cards don’t have the 5V monitor capability

#sensors #adc

Hi Bryan, I updated /etc/sensors.d/draws as indicated and I am now seeing that the +5V sensor is reading +1.17V. I have the early adopter card. Any idea why the voltage might be reading low? Thanks, D

#sensors #adc

Thanks Bryan, Nothing to worry about then . . . hi hi. Cheers es 73, Daniel VE3NI / NI2D

#sensors #adc

Jack, I just ran DRAWS Manager with the updated config and it works fine.

#sensors #adc

Bryan, That’s very interesting! Here is what the new board I just received is reporting: I see “in5: +2.50V” not “+5V: +5.06V” on that top line. Maybe I need to run an update of code here? Jack – KD4I

#sensors #adc

What does sensors report? pi@K7UDR:~ $ sensors rpi_volt-isa-0000 Adapter: ISA adapter in0: N/A ads1015-i2c-1-48 Adapter: bcm2835 I2C adapter +12V: +13.52 V +5V: +5.06 V User ADC 1: +0.00 V User ADC 2:

#sensors #adc

Make sure you have an updated draws-manager (left menu)

#sensors #adc

Bryan and John, Essentially the same as yours Bryan! The one line different says: in5: +2.50 V Same as on the Dashboard. The very first thing I did when I re-checked it just now was to update the DRAW

#sensors #adc

Check This File carefully, the last line performs the 2X pi@K7UDR:~ $ cat /etc/sensors.d/draws #DRAWS uses the TL024 Which is SW Compatible with thw ADS1015 #It's an 8 Channel ADC, but only 4 Channels

#sensors #adc

Bryan, That’s the problem! Most of the critical lines are missing in that file. Mine reads: chip "ads1015-*" label in3 "User ADC Differential“ label in4 "+12V" label in6 "User ADC 1" label in7 "User A

#sensors #adc