Thanks for replying Basil. The instructions do not call for a play -l until configuring the sound card. The instructions link you posted is the one I used twice to configure the Draws Hat on a rPi 3b.

#draws #direwolf #a25

I haven't used my draws in about 5 months. I started it up and did an update and then upgrade. Rebooted, now it won't reboot. I etched a new image and still get the same problem. I'm no expert on this

#draws #a25

My radio and cable arrived. I missed something in the config script for A25 setup. What do I need to do so the ./btest.sh -P udr0 finds the DRAWS channel? My results are: Status for direwolf.service:

#a25

# Get the latest versions of scripts cd cd n7nix git pull # Refresh the local bin directory cd config ./bin_refresh.sh # Check you ax25 status cd cd bin ./ax25-status # start direwolf & ax.25 sudo su

#a25

Did you get your new image from http://nwdig.net/downloads

#draws #a25

Thanks for the fast reply John!! No, i had got the image on the 27th. I will etch this one here and see how it works. Thank you

#draws #a25

Not sure how to set up the IPTables for AX.25, so I used my wireless access to my router during the config setup I used the IP address twice during the setup. Unfortunately, the information to set up

#draws #direwolf #a25

David Nussdorfer <davesworld06@...> writes: No new information from you to comment on. I'm guessing the tlv320aic driver is not loading for some reason. The output of showudrc.sh would confirm t

#draws #direwolf #a25

I had a PIJuice hat between the Draws Hat and the rPi 3b. showudrc.sh text showed that I was missing the UDRC radio. I placed the Draws Hat onto another rPi without the PIJuice hat, and the UDRC radio

#draws #direwolf #a25

To All, This afternoon I downloaded NW15 and then ran the script for updates and fixes. ie. To get fixes and updated apps: cd cd n7nix git pull cd config ./bin_refresh.sh When I finished running the "

#a25

The icon represents the action that will occur if you click on it. If there is an AX.25-control icon with an X through it, then ax.25 is running and clicking on the icon will stop AX.25 If there is ju

#a25

If you read the Getting Started Guide https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started you will see all you need to do after the initial config is to run: ``` ./ax25-start ``` T

#draws #direwolf #a25

Hi, any news regarding DRaws Hat + PiJuice Hat compatibility? thx

#draws #direwolf #a25

Hadn't looked into it before. I am now, as of 30 minutes ago, install script worked fine, status looked good, UHF/VHF radios work great, will test HF when I get an antenna back up. Ran split_toggle.sh

#a25

Larry, Yes. Good assumption. In the near future you will be able to more easily control each port ie. on/off 1200/9600 baud. /Basil n7nix

#a25

Hi Basil, I seem to concur with J P Watters as it is a bit counter intuitive. For those that don't run headless, it seems it would be better in the GUI for the icon to indicate the current state of th

#a25

Four points follow. First, I am not a gui-guy in the least, so feel free to disregard anything I have to say about this. Hoop, K9QJS, made an attractive icon & I took my lead from him. He is a MAC-man

#a25

My two cents on this. I would disagree. I feel that the icon should represent what the icon is going to do. So if it has an X on it, that means it’s going to to stop AX25. If it doesn’t have an X, the

#a25

Works for me this way, too. Used regularly. 73 Hoop, K9QJS

#a25