I am not sure if this is still the case as the latest Buster image may include the updated kernel. When I did this on an R-Pi 3B+, I needed to run rpi-update to get the latest kernel and once that was

#yaac #replacecompass #draws #install #js8call

Hi Corky, The current "buster" seems to work fine at my place with the N7NIX script. I find clean installs work best, but Pi 4/Buster are still leading edge.

#yaac #replacecompass #draws #install #js8call

Hi John, I don't think the dist-upgrade makes any difference but I'll try again. Frank - K0FEI

#yaac #replacecompass #draws #install #js8call

I promise to do a clean install on Buster, no scripts, to documents what it is I did to get the sound card detected. Just to confirm with everyone that is chiming in right now that hasn't got it worki

#yaac #replacecompass #draws #install #js8call

Hi Mike, I am powering through the Pi not the 12 volts, but I don't think that makes any difference as long as the power supply is not being maxed out. I have tried using the 12 volts in the past. Fra

#yaac #replacecompass #draws #install #js8call

Hi John, I redid it using sudo apt upgrade - no difference. Maybe the best way forward, since you guys can get it to go, would be to just have you guys make a buster image ready to go for the Pi4 and

#yaac #replacecompass #draws #install #js8call

Hi I just wanted to let the group know that I have made good progress. I started from scratch with a clean buster image and using my Pi3B (to rule out any issues specific to my PI4). With just the out

#yaac #replacecompass #draws #install #js8call

Hi Basil, Sorry to have wasted your time. 73 - Frank - K0FEI

#yaac #replacecompass #draws #install #js8call

Second that notion. There is a lot of what I consider unwanted fluff in this image since I don't care about packet radio. I would really like to have a clean image with only the necessary drivers and

#yaac #replacecompass #draws #install #js8call

I was able to successfully see the sound card when completing the steps that Mr. Hays gave. The issue I have is going onto the n7nix scripts. After running the ./app_config.sh core, I no longer see th

#yaac #replacecompass #draws #install #js8call

Edouard Lafargue <ed@...> writes: In the latest kernels supported by Raspbian (4.19.58) DRAWS hat required drivers are in the main stream Linux kernel. You still need to load the overlay in /bo

#yaac #replacecompass #draws #install #js8call

There is no upgrade path from draws_image13 which uses Debian stretch to the latest Raspbian distribution which uses Debian buster. This is because the transition of the DRAWS driver support to be in

#yaac #replacecompass #draws #install #js8call

Mitch Winkle <ab4mw@...> writes: Use the latest Raspbian image that supports Debian buster and add these lines in /boot/config.txt dtoverlay=draws,alsaname=udrc force_turbo=1 /Basil n7nix

#yaac #replacecompass #draws #install #js8call

Hi Jonathan, Are you using the hat with the gps antenna on the side with the sockets or on the back of the card? Thanks Frank - K0FEI

#yaac #replacecompass #draws #install #js8call

I have had both recognized with the Buster version.

#yaac #replacecompass #draws #install #js8call

Stretch is the best path for Pi 3 and Pi 2. If you have a Pi 4, you will need to use Buster and the edit that Basil lists. Now that the DRAWS™ support is directly in the Buster kernel, it is configura

#yaac #replacecompass #draws #install #js8call

Frank, I am using the card with the GPS antenna on what I would consider the back. The GPS antenna antenna is on the same side as the power. Thanks, Jonathan

#yaac #replacecompass #draws #install #js8call

And make sure the lines are added at the end of /boot/config.txt in that order. dtoverlay=draws,alsaname=udrc force_turbo=1

#yaac #replacecompass #draws #install #js8call

Hi Jonathan, Could you look at a couple of things and tell me what you are seeing. 1. Could you enter sudo lsmod. That should display a list of kernel modules loaded. 2. Could you cat /boot/config.txt

#yaac #replacecompass #draws #install #js8call

Hi Basil, Just adding the lines to /boot/config.txt didn't get the tlv modules to load and I could not see the sound card. If I put those lines before the drtparam=audio=-on then aplay -l said there i

#yaac #replacecompass #draws #install #js8call