Hi Brian, Searching the forum I see Tom KE5ICX has his FT-8900 working with a DRAWS in 03/2019. https://nw-digital-radio.groups.io/g/udrc/message/2932 If you are having problems I recommend using the

#ax25 #ft-8900

Basil: I thought it would just be easier if one connector had ax25 and the other did not. Just flip a switch over to whatever mode you want without have to do any commands too change over. The switch

#ax25 #hfmodes

Mark J Culross <mjculross@...> writes: Have fun in your training class. I was trying to qualify your cable and I don't think that is where the problem lies. After verifying that my IC-706 ca

#aprs #ax25 #direwolf

Pleased you have things working! Thanks for posting your success. /Basil n7nix Todd via groups.io <ic7461@...> writes:

#direwolf #ax25

This is a paclink-unix question. Answer: wl2kax25 -c <someRMSGateway> <someDigipeater> wl2kax25 -c WC7EC-10 KH7RFI-7 If there are no other dash args other than -c you do not need to include it. This w

#ax25

Mheard is working now on my draws system. I had fixed the duplicate call sign in /etc/ax25/axports. However I had not rebooted. Alternatively I could have restarted ax25 service by running ax25-stop a

#draws #ax25

Sent you a private email to john@.... Let me know if you got it. Thanks Paul

#ax25 #gps

No not a mistake, it is a good idea. No not required I do not comment on any Windows utility you may use. I do not use Windows. No it is just a warning and a symptom of a mis-configured /etc/ax25/axpo

#direwolf #ax25

Basil, Will do, Thanks

#ax25

Great news Basil! Thanks for your efforts in this entire thing! ------ 73, Jim VA7SHG - Phone VE7TGZ/VA7TGZ - Other

#ax25 #direwolf

Search forum: https://nw-digital-radio.groups.io/g/udrc/topics Check Wiki: https://nw-digital-radio.groups.io/g/udrc/wiki/home Check docs: https://github.com/nwdigitalradio/n7nix/tree/master/docs I ha

#draws #audio #ax25

Basil, and others, I occasionally see these or similar errors (premature disconnects) at my Winlink RMS, NX2I-10. Other users reported the problem but without a lot of additional information. I have b

#ax25 #direwolf

Ok thanks for the help and I’ll give the new one a try too.

#draws #direwolf #ax25

Basil, Thank you for sticking with this as well. I take it from your mention of the 3B+ that if I had used the 3B we would not have seen this problem. Is this a correct understanding of your comment?

#ax25

Great to hear you have some things working. Please know your problems & feed back are very important to us. I am using the wiki at groups.io now and if you check it out you should see I've made an att

#configuration #management #draws #direwolf #ax25