"Raspberry Pi OS" is the former Raspbian

#udrc-ii #compass #direwolf

Ulf, Compass Linux is deprecated and is unlikely to run with a RPi 4. Pull an image from http://nwdig.net/downloads/ -- this is the current Raspberry Pi OS with driver load pre-configured. (Current Ra

#udrc-ii #compass #direwolf

I have a UDRC-II hat on a Rpi3 and it works well. Now, I would like to put the UDRC-II on a Rpi4 using Raspbian Buster (need the 5GHz wifi). Is there any problems coming my way with this solution? I s

#udrc-ii #compass #direwolf

Linux configuration by convention lives in /etc or /usr/local/etc direwolf config is here: /etc/direwolf.conf Just my preference: I found 7 inch screens, even the superior Sunfounder 1024x600 display

#draws #compass #dstar

Brian, Basil, All, @ Basil – which copy of direwolf.conf does your start up script modify? I am missing the obvious as usual… With Beta2- So wsjt and fldigi were a slam-dunk here, they just worked wit

#draws #compass #dstar

alsamixer settings are generally by radio, not application. Once they are set for a radio, you can move from program to program. [Not all radios are equal, and not all radios have been tested.] Virtua

#draws #compass #dstar

I have no urgent needs for anything DRAWS related. I know I'm an early adopter -- I get it. But it would be really helpful if there was some kind of TODO list so I know what I should even be messing w

#draws #compass #dstar

Hold off unless you have an urgent need Anna is working on something.

#dstar #draws #compass

Before I debug any further, is DRAWS supported as a dstarrepeater controller yet? 12:08:38: Opened hw:1,0 hw:1,0 Rate 48000 12:08:38: Error: UDRCController: Unknown product Detected 12:08:38: Error: U

#dstar #draws #compass

All DRAWS owners, Setting up xastir for the DRAWS board was not a slam dunk! This message is longish but my discoveries and explanations here may help if you are relatively Raspbian naieve. If you hat

#draws #direwolf #compass #xastir