Happy to hear that you have it working Jakob! aa0jr de n7nix

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Thanks Basil, I get input and output signals! That means it is working now with fldigi. CAT with flrig. I will observe it and do the final finetuning. Thanks again and 73 de jakob, aa0jr

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Good! The ALSA control values are incorrect. If you run the following script in a console that should get you close. setalsa-ft817.sh Is your radio a Yaesu FT-817 or an FT818? You mention both.

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Hi Basil, Now the NWDR image is up and running. I followed the WIKI instructions up to the fldigi installation and setup. When I arrived at the output gain adjustment with the fldigi Tune function, I

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Hi Jim, Woow, I rode the wrong horse! I was totally unaware of that. I did not realize that there is a difference between HamPi and the NWDR image. Let me do the download and installation. Will see if

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

No, you are clearly using the HamPi image (which is an abomination imho). Basil is asking you to use the NW Digital DRAWS image, designed specifically for the DRAWS hat. It can be found here: http://n

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Hi Basil, Here is what I did so far: 1. I downloaded the file HamPi_v1.2a.img.xz on 1/21 2. I extracted it and got a folder with the file HamPi_v1.2a.img 3. I formatted a brand new 64 GB Micro SD with

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Below is what you will get if you do NOT use the NWDR image and follow the 'Getting Started' guide. pi@hampi:~ $ udrcver.sh bash: udrcver.sh: command not found pi@hampi:~ $ showudrc.sh bash: showudrc.

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Basil, here is what I got: pi@hampi:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] Subdevices: 4/4 Subdevice #0: subdev

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Until you have a successful setup use the NWDR image and follow the 'Getting Started Guide' in the UDRC wiki. https://nw-digital-radio.groups.io/g/udrc/wiki/8921 Focus on one program, FLdigi, and get

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Thanks Corky and John for coming back on this issue. Yes, I have interrupted line 6 of the cable time ago. I saw these instructions somewhere.

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

As Corky says, modify the 6 pin cable. The FT-817 is one of the most tested units with DRAWS™ and works quite well.

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Are you using a 6-pin cable that has pin 6 connected? If so you will likely need to follow the instructions for removing that pin as the Yaesu radios take pin 6 as an input in addition to using it as

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

I installed the HamPi 1.2 on a Raspberry 4B 4GB and a DRAWS hat installed. I can't make it run with Wsjt-x or Fldigi with the FT-817 (FT-818). At this time I want to run it on 20 to 40 meter shortwave

#ft-817 #audio #drawsmanager #draws-manager #wsjt-x

Hi Basil, I'm back at it. So close. After pulling the #6 pin (and breaking the key off... oops), I can now see all sorts of APRS signals streaming in with: tail -f /var/log/direwolf/direwolf.log Howev

#draws-manager #ft-817 #ft817 #draws #gps

Great to hear. Found a DRAWS HAT ID EEPROM Name: hat Product: Digital Radio Amateur Work Station Product ID: 0x0004 Product ver: 0x0108 UUID: 07ca235a-b510-43c0-8ec5-86e5b78e646f Vendor: NW Digital Ra

#draws-manager #ft-817 #ft817 #draws #gps

Hi Again, Thanks for sticking with me. Much progress. New install using "current_image.img" Yes on battery, tried a new one too. udrcver.sh (in /bin or /n7nx/bin, same result): Found a DRAWS HAT ID EE

#draws-manager #ft-817 #ft817 #draws #gps

That is an old post and is no longer relevant as the DRAWS sensor overlay has been fixed in the latest Linux kernels since last August. The following post describes what you need to do to get draws-ma

#draws-manager #ft-817 #ft817 #draws #gps

Thanks Basil. HF to begin, I am new to digital modes and have worked with Windows and my IC-7300. In reality using on an FT818, but should be the same settings as 817 to start. I figured I can adjust

#draws-manager #ft-817 #ft817 #draws #gps

You are not providing any information about which HF or VHF/UHF radio on the FT817 you are using. Assuming you want packet on your VHF/UHF radio working, like any TNC or sound card you need to set the

#draws-manager #ft-817 #ft817 #draws #gps