not using a draws yet, but i am using ham radio deluxe on my laptop and i have the settings as below, just remember for it to accept out of the data port, you need to tell it specifically to use the c

#wsjt-x #kenwood #flrig

I am working to test WSJT-s on the latest image of DRAWS image. I have connected a USB to serial adapter plugged in to the COM port on the radio and have a DIN cable between the UDC0 and the data port

#wsjt-x #kenwood #flrig

Per owners manual of the TS-440 it should be 500mV or less. I’ve attached a screen shot of the only page that addresses input voltages for that connector.

#js8call #beta7 #din6 #kenwood #applications

Bryan & John - I just realized it would be much simpler for me to use the AFSK input and output RCA jacks to the TS-440s to verify the DRAWS card will be able to drive the transmitter before tearing i

#js8call #beta7 #din6 #kenwood #applications

Bryan & John - I have searched the Kenwood documentation and can't find a spec for the Data Input line on the 13 DIN connector. That said I have found a mod that changes where the Data Input ties into

#js8call #beta7 #din6 #kenwood #applications

Max Output from DRAWS is ~3.2V Peak to Peak Bryan

#js8call #beta7 #din6 #kenwood #applications

What is the spec for the PTP input voltage?

#js8call #beta7 #din6 #kenwood #applications

Team - The DRAWS TI DAC does not have enough audio output to drive the Kenwood TS-440S Data Input connection which is on pin 11 of the 13 pin DIN connector on the back of the radio. This is not a issu

#js8call #beta7 #din6 #kenwood #applications

Fellow DRAWs Early Adopters, I am happy to report I am making progress with getting the DRAWS card to work with the Kenwood TS-440S on HF digital modes. I have JS8Call & WSJT-X FT8 Mode decoding signa

#js8call #beta7 #din6 #kenwood #applications