Basil, I am using an FT-857. I just switched my cable to the one that came with the DRAWS and it works now. Thanks for the help! Matt k1mda

#setup

That would be VERY helpful.

#draws #setup

Thanks guys. I found fldigi under internet. Rick Ka4ohm

#draws-manager #setup #draws

If you have found the correct values for a given radio and mode (audio or discriminator output), you can share them here https://nw-digital-radio.groups.io/g/udrc/table?id=11992 -- please include comm

#draws #radio #database #setup

If you don't want to make your own cable, Ham Made Parts makes a variety of cables, including a Kenwood/Baofeng handheld to Mini DIN-6 cable. I have not used this particular cable, but have purchased

#setup

Yes, you will need to stop and start the daemon (or reboot) to pickup the new direwolf, if you have it running.. sudo systemctl stop direwolf sudo systemctl start direwolf

#setup #draws #beta #image

Basil et al, I goal is : 1) HF only setup that uses the DRAWS to two HF Rigs 2) paclink-unix e-mails and all WinLink forms (still need to learn how to access them) on one channel with auto-send and au

#hfmodes #setup #hf

Merry Christmas Julian All of the adjustment I made to the receive signal was through the ADC Level of the alsa mixer. FLDIGI has a go no go "diamond shaped" icon on the bottom tool bar of the main sc

#setup #fldigi #draws

Hi Art. were you able to get your ft-891 working properly with an HF radio using an HF digital mode? 73 Julian oh8stn

#setup #compassimage #draws #earlyadopters

Thanks John, I will try that. Keying the rig is not the problem though. I was using flrig with fldigi CAT only and it would go into transmit with no signal. When I checked GPIO 12 in fldigi and enable

#betaimage #setup #draws

Trying to get JS8 FlDIGI and FT8 going I can get cat to change bands and fresh but can not get it to decide will check out your post. Thank'z Tim Sent from my Verizon, Samsung Galaxy smartphone

#fldigi #js8call #setup

https://www.youtube.com/watch?v=8jzHA_cjuwM

#draws #setup #video

Ah. I see that my assumptions were backwards. It is pulled to 0 when open, 1 when closed. This is the opposite what I assumed. -- Brian Badger

#setup #compassimage #draws #earlyadopters

I made those few changes and up and working great!!!

#draws #gpsd #gps #setup

https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%E2%84%A2%3A-Setup-NTP-Timeserver-Using-Chrony

#draws #ntp #chrony #timeserver #setup