Andrew have been running it for several years on a Raspberry Pi and you are right the maps are slow. The course is long and narrow so have to pan only once. I use a raspberry pi because we work on bat

#yaac #xastir

On the other hand, the Pi does work well in a SAG vehicle, because it's small and can be powered off a 12v power adapter. ________________________________________ Sent: Friday, August 6, 2021 5:12 PM

#yaac #xastir

Tim: Speaking from experience, I wouldn't run YAAC on a Pi for bicycle operations, unless you're using an alternate disk drive device for the YAAC tiledir (where the imported OpenStreetMap data is sto

#yaac #xastir

Basil, Thank you for sharing the ports. Maybe this with a drawing should be published I think it would help. If you are interested this is for a bike event base station to see the SAG vehicles as they

#yaac #xastir

Thanks for posting your console output. Everything looks good. With regards to YAAC: Port 1 is left mDin6 connector Port 2 is right mDin6 connector With regards to Direwolf Port 0 is left mDin6 connec

#yaac #xastir

On Fri, Aug 6, 2021 at 08:32 AM, Basil Gunn wrote: Hi Basil, I am using he AGWPE port as Andrew mentioned yesterday. That is how I always connect direwolf to YAAC. When you select the AGWPE port it ha

#yaac #xastir

1. From your previous post I still would like to confirm that your AX.25/Direwolf/DRAWS is working properly. Please post the console output of: ax25-status buginfo.sh systemctl status direwolf.service

#yaac #xastir

YAAC does not connect directly to a port on the DRAWS hat. Instead, it connects to the Direwolf process, and DireWolf connects to the appropriate port (or ports) on the DRAWS hat as configured in the

#yaac #xastir

I did not see the port in your file you show above. I don not see a way to determine the port of the Draws to connect. How can you tell the active port connect to a radio to make sure you can get YAAC

#yaac #xastir

Thank you all for the info XASTIR is up an running Working on YAAC next Tim - AG6RS

#yaac #xastir

Tim, I do this all the time. You should not need to touch your ALSAmixer sound settings. You do need to go back to the “Getting Started Wiki” at Groups.io and carefully work through the section on usi

#yaac #xastir

As Basil says, his AX25 scripts start and stop both the Direwolf modem and the AX25 stack. YAAC is pretty simple to connect. With direwolf running, you simply go into interfaces and select an AGW inte

#yaac #xastir

I have some Xastir configuration notes here: https://github.com/nwdigitalradio/n7nix/tree/master/xastir The "Configure interfaces" section will be useful for you. These notes were written for a UDRC I

#yaac #xastir

What are the proper port settings to use when setting up the DRAWS Hat with YAAC? I have everything working fine between the DRAWS Hat and my FT-891 using WSJT-X and FLDIGI with AX25-stop Now I think

#yaac #xastir

Until Basil has a chance to add the updated Xastir, a prog_update won't update your install. The only path right now is to build from source.

#draws #gpsd #config #xastir

I attempted to use ~/n7nix/bin/prog_refresh.sh script to update programs. FLDIGI builds and updates but XASTIR fails. XASTIR -V is an invalid option (and XASTIR -v sets the debug level). ./xs_verchk.s

#draws #gpsd #config #xastir

Thanks for pointing this out John. I will putter around with Annaliese’s instructions… Exactly why I bought this little beast in the first place! Since my most of rigs are primarily ICOM, it will be i

#xastir #wsjtx #pulseaudio #draws

Here is a screenshot from K7UDR's remote base. It runs a headless DRAWS™ HAT on a Raspberry Pi 3+. I access it from about 60 miles away over VNC. The left and right mini DIN-6 ports run independently

#xastir #wsjtx #pulseaudio #draws

I rebuilt Xastir from the latest git pull (2.1.1) and I'm now able to use GPSD to update my location. Basil you were better able to explain to Tom and Curt what the hardware DRAWS is using, I opened t

#draws #gpsd #config #xastir

The problem with Xastir accessing gpsd for position data has been identified and a patch has been tested and merged into the Xastir master source on GitHUB. Thanks to Tom Russo of the Xastir team and

#draws #gpsd #config #xastir