Hello Everyone, I have updated my case and it is Thing 3897403 https://www.thingiverse.com/thing:3897403. It uses a Raspberry Pi Poe Hat between the Raspberry Pi and the Draws Hat. This brings a tempe

#case

Hi Guys, I spent quite a bit of time on this because I, like Jonathan, have first run Draws hats which also require the dtoverlay= line. I found the best place to put the new lines are the first non-c

Hi Bryan, So what is the verdict on the strange product_ver? Can you send me a program to change it to something the drivers will be happy with? It would seem this card has not been shipped yet :-) Th

Hi Brian, It reports 0x0204. udrcver.sh shows: Found a DRAWS HAT ID EEPROM Name: hat Product: Digital Radio Amateur Work Station Product ID: 0x0004 Product ver: 0x0204 UUID: 2420cda1-931d-478c-80e5-d7

Hi Edd, Just glad its working. I must have a really really early card. Hey - its a hobby and if you are not having fun then you are doing it wrong :-) 73 - Frank - K0FEI

Thanks Ed, I can't wait for an aarch64 system. I think it will really allow the Pi4 to show what its made of - especially with 2 or 4 gig. 73 - Frank - K0FEI

#yaac #replacecompass #draws #install #js8call

Hi Edouard, Where did you get kernel 4.19.69-v8+? The best I can do this morning - Sept 5 is 4.19.66-v71+ with sudo apt upgrade and 4.19.69-v71+ with sudo rpi-update on a Pi4. Both of them have the tl

#yaac #replacecompass #draws #install #js8call

Hi Edd, I tried doing the expand and then changing the system name, the password, set ssh and vnc, set the timezone to Denver, and connected to my wifi. GPSMON was still working. Rebooted and GPSMON w

Hi Edd, That is useful information. I'll look at it as well this evening after work. As long as the interface to the hardware is working then it may be gpsd is getting confused with the time change. I

Whoops - Auto Correct got the better of me - it is sudo raspi-config. 73 - Frank - K0FEI

Hi Guys, I have re-uploaded the image as the .gz file that Etcher will transfer to a SD card. You will want to expand the file system first thing - sudo rasps-config then select option 7 - Advanced an

Hi Edd, It may have been better to have not run the prog_refresh.sh script. I am not sure what it does and those scripts have not been changed to reflect Buster and the drivers being a part of Raspbia

Well darn. It seems this taring it to an .xz file was not compatible with Etcher. You can uncompress the .xz file (tar -xJf Buster-Draws-2019-09-01.xz) and flash the resulting .img file to the SD (I t

For those that want to just download an image for their DRAWS setup - here is an image that should work on Pi3 or Pi4 based on Buster. It uses the DRAWS drivers that NW Digital submitted to the Raspbi

Hi Jonathan, You are the MAN! You managed to reproduce the problem that NW Digital denies exits and have a work around! All the people that say you do not need the dtoverlay= line in config.txt probab

#yaac #replacecompass #draws #install #js8call

Hi Basil, Sorry to have wasted your time. 73 - Frank - K0FEI

#yaac #replacecompass #draws #install #js8call

I'm sorry Jonathan, You did show the showudrc and it shows some of the modules, and the /boot/config.txt. If could show all the modules the sudo lsmod and the /etc/modules file that would be interesti

#yaac #replacecompass #draws #install #js8call

Hi Basil, Just adding the lines to /boot/config.txt didn't get the tlv modules to load and I could not see the sound card. If I put those lines before the drtparam=audio=-on then aplay -l said there i

#yaac #replacecompass #draws #install #js8call

Hi Jonathan, Could you look at a couple of things and tell me what you are seeing. 1. Could you enter sudo lsmod. That should display a list of kernel modules loaded. 2. Could you cat /boot/config.txt

#yaac #replacecompass #draws #install #js8call

Hi Jonathan, Are you using the hat with the gps antenna on the side with the sockets or on the back of the card? Thanks Frank - K0FEI

#yaac #replacecompass #draws #install #js8call