I was not upset about your responses I did every thing you said it was the lack of response from the office, and I think maybe they should offer to test some of the unit people cant get the unit to wo

#wsjt-x

still no return contact from them. Its like when you have a problem with there card they forget you. ill take it to pay pal Monday before its to late Rob k6jus

#wsjt-x

I meant pin 1 for audio

#wsjt-x

and as requested I checked pin on at 50 mv setting no audio, receive work fine Rob k6jus

#wsjt-x

last post I had no audio I checked with an o scope and posted the settings and it seams like looked at my settings to see if I missed something. receive works the radio work with my signal link so I w

#wsjt-x

I sent a message yesterday morning and this morning and got no responce

#wsjt-x

well all went quiet I guess ill dispute with paypal

#wsjt-x

Here are the outputs pi@k6jus:~/n7nix $ piver.sh Pi 3 Model B+ Mfg by Sony UK Has WiFi pi@k6jus:~/n7nix $ udrcver.sh Found a DRAWS HAT ID EEPROM Name: hat Product: Digital Radio Amateur Work Station P

#wsjt-x

well today I made a din brakeout cable to test the audio to the ft-817 with a o-scope and using ./measure_deviate.sh -c left there is no audio on pin 3 or any other pin. I tested with pin 6 connected

#wsjt-x

thanks Jim but the radio will go into transmit but no power out there is not enough drive to show any power out . it has to be a audio problem Rob k6jus

#wsjt-x

well tried it all over with a signal link and the transmitter works then plugged in the hat and not enough audio to drive the radio so it can be the radio and look like I am dead in the water. I have

#wsjt-x

just did a rest on the radio and still no transmit powers and also don't see how it can be the radio if it works with other soundcards. just tried the setalsa-ft817.sh command again no joy I have also

#wsjt-x

yes over and over went home to day and rechecked the radio settings. I would think if the radio work in receive and with a signal link the radio settings should be right. last night had the drive turn

#wsjt-x

It’s a ft-817nd

#wsjt-x

I did use Johns web app and it came up with the same values as the draws manager. I have turned the gain up all the way and no clean tone. the radio works fine with my other rp4 and a signal link so I

#wsjt-x

Run your test and it keyed the transmitter but no audio on my other receiver. Did make kind of a motor boating sound here is that file ==== Sound Card ==== udrc card number line: card 1: udrc [udrc],

#wsjt-x

I've been trying to get my Raspberry Pi 3 working with my DRAWS hat but I think either my connection is messed up or my audio setup / levels wrong. I think Im doing something wrong I have used the dra

#wsjt-x