I removed pin 6 from both ends of the cable and it didn't seem to help in my case in my ft-891. In fact it was rather a step backwards as I no longer was receiving signals.

Do we need to remove pin 6 for FT-891s?

Hello Tim, Sorry about the delay in my response, life took priority! I've set my width to 3000 Hz and noticed no difference in my ability to send FT8 transmissions between the DRAWS and my radio. The

#ft-891 #draws #ft-8 #wsjtx

Forgot to include my DRAWS manager screenshot! Cheers, Matt - N7ROO

#ft-891 #draws #ft-8 #wsjtx

Thanks for the response Tim. I tried resetting my radio and also reflashed the DRAWS image. I've confirmed that I have the same menu settings as you, and that I'm using the left channel. I've included

#ft-891 #draws #ft-8 #wsjtx

Thanks all for your suggestions. I've made sure that my "DATA IN SELECT" (setting 08-09) is set to "REAR" rather than "MIC", and confirmed this by whistling into my mic while transmitting. No transmis

#ft-891 #draws #ft-8 #wsjtx

Hello, I've been trying to set up my DRAWS and FT-891 to use FT8 via WSJT-X. I've been following the videos and settings from Julian and Steve, and can receive messages ok, however whenever I transmit

#ft-891 #draws #ft-8 #wsjtx