Thanks guys- the script seems to have re-enabled it and is working again across reboot. Clifford

#draws-manager

My DRAWS manager has stopped loading and I would like some guidance on troubleshooting it. This site can’t be reached 127.0.0.1 refused to connect. Try: Checking the connection Checking the proxy and

#draws-manager

The antenna has a huge view to just about 90deg straight up and almost 180deg from side to side. My cell phone held in exact same spot has no prob fixing on 10 sats though the normal 10.6ft margin of

#gps

Ok that was helpful- just took a look and there are some signals there- but I am adding a photo of where my GPS antennas are located. They have a huge view of the sky and if this is the sort of perfor

#gps

And to reiterate- never get a fix- (I am confused by the right column showing sats "seen" but not "used")

#gps

- neither antenna seems to work. Two things when running your scripts- 1- script was sort of halted at "lines 1-3/3 (END)" I had to Ctrl-C to get the terminal to accept the next command (cd) 2- I forg

#gps

Yes screwed on snugly. Antenna is outside facing the clear southern sky. Thx.

#gps

I completed brand new setup and all "getting started guide" steps. Left it overnight and still no fix. I set up SSH and port forwarding if any gurus would be willing to take a look. Contact me private

#gps

I figured it out by using VNC - appears there is a difference when operating as user vs su- will see how it goes.

#gps

Brand new install and there is still no n7nix dir as mentioned in the getting started guide.

#gps

PS- I also do not see the n7nix dir mentioned in the getting started guide.

#gps

1- I am using the aluminum DRAWS early adopter case. No issue there. 2- gpsd is good- almost 4hrs- no fix (I stopped/restarted it in the idea I was closing/reopening to troubleshoot not from any inher

#gps

I have used the DRAWS manager to stop the GPSD service- connect one of the 2 antennas (I marked them 1 and 2) and restart the GPSD service. Neither antenna gets a fix after 10mins. I then shutdown the

#gps

OMG now neither antenna when reconnected gives any fix. I am flailing here unsure how the system is supposed to respond.

#gps

ACK- sry for all the posts- but ultimately BOTH antennas are identical w feed lines of same length- but one works and one does not. If I could edit posts here I would have. Thx

#gps

OK- so I tested both antennas more- and it is certain that the antenna with the long feed line does NOT work. W/O antenna I let DRAWS lose fix- upon connecting long lead ant- nada- but connecting the

#gps

OHHHHHHH 800m as in ASL- yes that is 2600ft - I SEE- thx

#gps

Yes- exact same antennas as was shipped w DRAWS- 3V-5V @ 1575.42MHz

#gps

How do I run? I tried: ./ udrcver.sh udrcver.sh run udrcver.sh cd to root then above THANKS

#gps

Both antennas work (one has much longer feed line than the other). I am wondering why there is no altitude data in CGPS and incorrect data in GPSMON (~800ft ASL- I am at 2500' ASL)

#gps