Well, that fixed the missing file! Here's the resulting information. ==== Check stat directory total 8 drwxr-xr-x 2 rmsgw rmsgw 4096 Jun 15 18:20 . drwxr-xr-x 4 rmsgw rmsgw 4096 Jun 15 19:22 .. -rw-r-

Sorry for the delay Basil. That file doesn't show up in the n7nix/rmsgw directory. All I have there is chk_gateway.sh, config.sh, fname_test.sh, grouptest.sh, readme.md, and install.sh

Basil, I get "No such file or directory"

Before updating to the latest image and now, since updating, my Winlink Gateway is working properly, folks can get into it and upload/download their messages. The one part that isn't working is that I

Thanks Basil. The Pi is connected to the internet, I can browse the web, update files and I can watch the gateway connect to Winlink. I also get ingoing and outgoing traffic (tested again this morning

#winlink

I finally had a chance to sit down and update to the latest build for the DRAWS. It is setup, working properly for connections but, after 24 hours, it's not showing up on the map or the RMS list. I've

#winlink

I ran the scripts that you sent and here's what I have. Here's the output of the ls -sal /usr/local/etc/rmsgw total 196 4 drwxr-xr-x 4 rmsgw rmsgw 4096 Nov 6 04:11 . 4 drwxr-xr-x 4 root root 4096 Nov

#rms #draws

Basil, Yes on the gateway request, I've had a gateway running (RMS Packet on a Windows machine) for a little over a year. If I have that running on the windows box while I'm setting this up on the DRA

#rms #draws

Progress is being made. I started with a fresh copy of the latest image. I went through the getting started, learned a few things along the way and this is what I am getting now. I think this is much

#rms #draws

Basil, Thank you for the quick reply. results of AX.25-status Status for direwolf.service: RUNNING and ENABLED Status for ax25dev.service: RUNNING and ENABLED Status for ax25dev.path: RUNNING and ENAB

#rms #draws

Working on getting WINLINK RMS application running on my DRAWS. The image is up and running and I suspect I am nearly there but, I am a noob to Linux so I'm stuck. I went through the setup and configu

#rms #draws