|
DRAWS (nwdr16) and APRS and HT not triggering PTT
Interestingly, when I plug the second radio in (a baofeng), and make the wouxun the secondary, ptt_ctrl -l on turns PTT on on the baofeng, but ptt_ctrl -l off doesn't turn PTT off on the baofeng. I'm
Interestingly, when I plug the second radio in (a baofeng), and make the wouxun the secondary, ptt_ctrl -l on turns PTT on on the baofeng, but ptt_ctrl -l off doesn't turn PTT off on the baofeng. I'm
|
By
Jon Gross
· #4924
·
|
|
DRAWS (nwdr16) and APRS and HT not triggering PTT
Sorry for the lack of clarity, I'm still feeling my way around this. Here are the actual symptoms (my previous posts of PTT characterization have been vicious lies due to misunderstandings on my part.
Sorry for the lack of clarity, I'm still feeling my way around this. Here are the actual symptoms (my previous posts of PTT characterization have been vicious lies due to misunderstandings on my part.
|
By
Jon Gross
· #4923
·
|
|
DRAWS (nwdr16) and APRS and HT not triggering PTT
Hmmm, same result. PTT triggers on the radio with measure_deviate, but ptt_ctrl and btest both fail to trigger PTT on the radio (plugged into left DIN port).
Hmmm, same result. PTT triggers on the radio with measure_deviate, but ptt_ctrl and btest both fail to trigger PTT on the radio (plugged into left DIN port).
|
By
Jon Gross
· #4921
·
|
|
DRAWS (nwdr16) and APRS and HT not triggering PTT
Further followup - using the ptt_ctrl script, I can't get it to trigger PTT on the radio, although the measure_deviation lights the PTT up fine.
Further followup - using the ptt_ctrl script, I can't get it to trigger PTT on the radio, although the measure_deviation lights the PTT up fine.
|
By
Jon Gross
· #4918
·
|
|
DRAWS (nwdr16) and APRS and HT not triggering PTT
Thanks Basil for the advice! Yes, I am using the right hand DIN port. I've tested the cable, and pin 3 goes to the PTT segment on the HT adapter plug (the base of the 3.5mm pin), the continuity is the
Thanks Basil for the advice! Yes, I am using the right hand DIN port. I've tested the cable, and pin 3 goes to the PTT segment on the HT adapter plug (the base of the 3.5mm pin), the continuity is the
|
By
Jon Gross
· #4917
·
|
|
DRAWS (nwdr16) and APRS and HT not triggering PTT
Hey all, I have started with a fresh install of nwdr16. I am following this: https://nw-digital-radio.groups.io/g/udrc/wiki/8949 and I'm in the "Test Transmit" phase - so far everything works. I have
Hey all, I have started with a fresh install of nwdr16. I am following this: https://nw-digital-radio.groups.io/g/udrc/wiki/8949 and I'm in the "Test Transmit" phase - so far everything works. I have
|
By
Jon Gross
· #4912
·
|
|
DRAWS on Pi 3b+ with Raspbian Buster
#draws
For anyone following along at home, I did get all the hardware working, ax25 configured and dire wolf configured. I installed pat, and am able to get the LED on the draws to light up when pat is tryin
For anyone following along at home, I did get all the hardware working, ax25 configured and dire wolf configured. I installed pat, and am able to get the LED on the draws to light up when pat is tryin
|
By
Jon Gross
· #3674
·
|
|
DRAWS on Pi 3b+ with Raspbian Buster
#draws
Thanks! What I ended up doing was basically this: 1. vanilla buster install 2. update all the things (apt update ; apt upgrade) 3. add snd-soc-tlv320aic32x4-i2c and ax25 to /etc/modules 4. add dtoverl
Thanks! What I ended up doing was basically this: 1. vanilla buster install 2. update all the things (apt update ; apt upgrade) 3. add snd-soc-tlv320aic32x4-i2c and ax25 to /etc/modules 4. add dtoverl
|
By
Jon Gross
· #3673
·
|
|
DRAWS on Pi 3b+ with Raspbian Buster
#draws
Aha! Thank you both. Instead of running the n7nix code, I've been using it as inspiration, and gotten things to recognize the sound card, thanks to n7nix, Lars and Karl and all the docs that exist in
Aha! Thank you both. Instead of running the n7nix code, I've been using it as inspiration, and gotten things to recognize the sound card, thanks to n7nix, Lars and Karl and all the docs that exist in
|
By
Jon Gross
· #3672
·
|
|
DRAWS on Pi 3b+ with Raspbian Buster
#draws
I have followed the notes here (https://docs.google.com/document/d/1Wq-jNLXYuREIOcr0OVu1FxPNhDFGuCOu6dX5OQ2BVxA/edit#). I'm on my second go-round with a fresh image. I can't seem to get the drivers to
I have followed the notes here (https://docs.google.com/document/d/1Wq-jNLXYuREIOcr0OVu1FxPNhDFGuCOu6dX5OQ2BVxA/edit#). I'm on my second go-round with a fresh image. I can't seem to get the drivers to
|
By
Jon Gross
· #3668
·
|