|
gpsd, amixer, sensor, and other issues
OK .. will do the return as requested. Thank you Basil and Bryan for the excellent service and support! :) 73, julie ac0wn
OK .. will do the return as requested. Thank you Basil and Bryan for the excellent service and support! :) 73, julie ac0wn
|
By
Julie McGrew
· #3562
·
|
|
gpsd, amixer, sensor, and other issues
So ... should I have him return the draws card, or do you wish me to do further testing? Also, if he returns the item do you wish us to include the gps antenna in the return? Many thanks for all your
So ... should I have him return the draws card, or do you wish me to do further testing? Also, if he returns the item do you wish us to include the gps antenna in the return? Many thanks for all your
|
By
Julie McGrew
· #3560
·
|
|
gpsd, amixer, sensor, and other issues
Hi Basil, pi@K7TMV-draws:~ $ i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- --
Hi Basil, pi@K7TMV-draws:~ $ i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- --
|
By
Julie McGrew
· #3558
·
|
|
gpsd, amixer, sensor, and other issues
Good morning Basil, The rPi is powered via the draws card which is reading 14.12 vdc Pin 2 on the gpio is reading 5.047 vdc pi@K7TMV-draws:~ $ amixer -c udrc get "LO Driver Gain" amixer: Mixer hw:1 lo
Good morning Basil, The rPi is powered via the draws card which is reading 14.12 vdc Pin 2 on the gpio is reading 5.047 vdc pi@K7TMV-draws:~ $ amixer -c udrc get "LO Driver Gain" amixer: Mixer hw:1 lo
|
By
Julie McGrew
· #3554
·
|
|
gpsd, amixer, sensor, and other issues
hmmm ... It appears reply by email is slow ... I'll answer here and apologize to all if there is a dup of this message. Thank you for the quick response! pi@K7TMV-draws:~ $ aplay -l **** List of PLAYB
hmmm ... It appears reply by email is slow ... I'll answer here and apologize to all if there is a dup of this message. Thank you for the quick response! pi@K7TMV-draws:~ $ aplay -l **** List of PLAYB
|
By
Julie McGrew
· #3551
·
|
|
gpsd, amixer, sensor, and other issues
One of our club members is having trouble with his draws card. I began troubleshooting and to isolate the the problem have done the following. Replaced the rpi unit with a new one - no change. Replace
One of our club members is having trouble with his draws card. I began troubleshooting and to isolate the the problem have done the following. Replaced the rpi unit with a new one - no change. Replace
|
By
Julie McGrew
· #3549
·
Edited
|
|
PiGate
Actually there are a number of issues that would make this a heavy lift. First off, squirrelmail uses php 5 and is not Stretch friendly. Also, that email client is now poorly supported. PiGate 1.5 cur
Actually there are a number of issues that would make this a heavy lift. First off, squirrelmail uses php 5 and is not Stretch friendly. Also, that email client is now poorly supported. PiGate 1.5 cur
|
By
Julie McGrew
· #3100
·
|
|
How do we setup dovecot and postfix to start at boot up?
Hi Basil, Thank you very much for your quick response. I’m currently using claws mail and sending email via the winlink system using packet, pactor, and telnet. Good to know the preferred process is s
Hi Basil, Thank you very much for your quick response. I’m currently using claws mail and sending email via the winlink system using packet, pactor, and telnet. Good to know the preferred process is s
|
By
Julie McGrew
· #2832
·
|
|
How do we setup dovecot and postfix to start at boot up?
I see the scripts for dovecot and postfix in /etc/init.d I have tried: "sudo update-rc.d dovecot defaults" No joy .... after a reboot and using: "service --status-all" they are still not running. They
I see the scripts for dovecot and postfix in /etc/init.d I have tried: "sudo update-rc.d dovecot defaults" No joy .... after a reboot and using: "service --status-all" they are still not running. They
|
By
Julie McGrew
· #2830
·
|
|
HF Rig Recommendations
#hf
#draws
Hi Chuck, I've used an IC-7300 with DRAWS and it works great. Using the Icom's sound card for the digital modes keeps the DRAWS two mini-din6 connectors free to use for packet and APRS applications. S
Hi Chuck, I've used an IC-7300 with DRAWS and it works great. Using the Icom's sound card for the digital modes keeps the DRAWS two mini-din6 connectors free to use for packet and APRS applications. S
|
By
Julie McGrew
· #2826
·
|
|
IC-7300 with USB CAT control problem corrected in Beta 7
#draws
#fldigi
#gpsd
#wsjtx
The goal was to control an IC-7300 with a USB cable and operate fldigi, wsjt-x, and JS8Call using the radio's sound card. DRAWS received the audio fine, but would not control the radio. The IC-7300 wa
The goal was to control an IC-7300 with a USB cable and operate fldigi, wsjt-x, and JS8Call using the radio's sound card. DRAWS received the audio fine, but would not control the radio. The IC-7300 wa
|
By
Julie McGrew
· #2756
·
|
|
Winlink Gateway
Hi Ed, Here's a link to the photo you requested. https://www.dropbox.com/s/k4z74iro1qkjujp/pilinbpq_rms_gateway.jpeg?dl=0 73, julie
Hi Ed, Here's a link to the photo you requested. https://www.dropbox.com/s/k4z74iro1qkjujp/pilinbpq_rms_gateway.jpeg?dl=0 73, julie
|
By
Julie McGrew
· #2604
·
|
|
Winlink Gateway
Hi Ed, The UDRC-II card provides 1200 baud support to an Alinco 135 and 9600 baud support to a Yaesu FT-7900 courtesy of Direwolf. A USB connection to a TNC-X feeds another Alinco 135 for the APRS iGA
Hi Ed, The UDRC-II card provides 1200 baud support to an Alinco 135 and 9600 baud support to a Yaesu FT-7900 courtesy of Direwolf. A USB connection to a TNC-X feeds another Alinco 135 for the APRS iGA
|
By
Julie McGrew
· #2594
·
Edited
|
|
Winlink Gateway
I'm confident you can make an excellent RMS Gateway using DRAWS. I ran an RMS Gateway on a Raspberry Pi 3 and a UDRC-II card last year that supported 1200 baud packet / digipeating, 9600 baud packet /
I'm confident you can make an excellent RMS Gateway using DRAWS. I ran an RMS Gateway on a Raspberry Pi 3 and a UDRC-II card last year that supported 1200 baud packet / digipeating, 9600 baud packet /
|
By
Julie McGrew
· #2591
·
|
|
Link to DRAWS image not working?
Tony, Many thanks! :) 73, julie /ac0wn
Tony, Many thanks! :) 73, julie /ac0wn
|
By
Julie McGrew
· #2426
·
|
|
Link to DRAWS image not working?
DRAWS™ Raspbian Images Current images are at http://images.nwdigitalradio.com Did I go to the wrong location? This link gives a 404 error on several different browsers. Any direction much appreciated.
DRAWS™ Raspbian Images Current images are at http://images.nwdigitalradio.com Did I go to the wrong location? This link gives a 404 error on several different browsers. Any direction much appreciated.
|
By
Julie McGrew
· #2423
·
|
|
1200 baud good …. 600 baud no joy
Hi Bill, Not the problem, but thank you very much for your response. :) 73, julie AC0WN
Hi Bill, Not the problem, but thank you very much for your response. :) 73, julie AC0WN
|
By
Julie McGrew
· #1513
·
|
|
1200 baud good …. 9600 baud no joy
A few days ago I setup my 2nd UDRC-II with an Rpi3. I added 2.2 k pull-down resistors to GPIO 12 and 23. Also added 4.7 k pull-up resistors to the sql lines on the din6 and the HD Sub-15 to 3.3 vdc. I
A few days ago I setup my 2nd UDRC-II with an Rpi3. I added 2.2 k pull-down resistors to GPIO 12 and 23. Also added 4.7 k pull-up resistors to the sql lines on the din6 and the HD Sub-15 to 3.3 vdc. I
|
By
Julie McGrew
· #1511
·
|