For those of us that purchased Kits early in 2020, will we be mailed cases or do we need to request them. Thank you, Ruben WA2NBL

Matt, You will need to set up your Pi as a Hotspot and log in directly to the Pi. Lots of info and scripts available on the internet. N7NIX may have something, KM4ACK has some nice scripts, haven’t tr

I'm a bit late in this discussion, but if you're looking for a quick and sure way to set up a hotspot on a DRAWS image try KM4ACK's youtube video. His scripts do all the work. https://www.youtube.com/

Thank you for voicing these issues, I thought it was my inexperience. Ruben WA2NBL

#desktop

Hi All, If we are affected by the error, will we be notified? I’ve had mine about a month. I’ve configured the software, but have not yet transmitted, everything works on receive. Getting antenna and

#audio

I connected a USB CAT 8 pin cable and the 6 pin mini din supplied with DRAWS hat and now have a working unit. Still plan to make a cable to work with the 4x2 header on the DRAWS hat. 73, Ruben

There’s an 8 pin 4x2 header next to the power connector. Check below the schematic for pin-outs. Ruben WA2NBL

I’m working on a similar issue with FT-857. Finally realized that I needed an additional cable for CAT. Ordered an 8-pin mini-din cable and located a source for the header connector. I’ll post with re

Hello Edouard, Just wondering if your program uses or can use hamlib, this would greatly expand the number of radios your program can use. Thank you and 73, Ruben WA2NBL On 10/16/2019 1:28 PM, Edouard