Hi, does anyone have experiences with cooling the RaspiP4 with the DRAWS on it. It wasn't able to remove the 4 distance pieces? A couldn't find another cooling plate that fits in the container. So I w

Hi Basil, yes my Raspi gets also hot, about 60 degree Celsius. It's not possible to install heatsinks like this one on the photo, cause they have to Bussi Erwin fastened from the bottom but there are

Hello Basil, thanks for your support - this weekend I got it running. Now try to go further in the installation of the Bullseye version. 73 de Erwin, OE1EKG

#pat

Thanks Basil, I did the task like you proposed in your description - but failed. So I did I clean installation with the image 2.20, installed ARDOP and setalsa-kx2.sh again, changed settings for KX3 a

#pat

Hello Basil, All of the installation (2.02) is running - great. Now I want to install PAT Mailbox. I went to the last description of a past post from you but this was not running. I'm struggling were

#pat

Hello Basil, after a long time I can write some feedback. First, the latest image 20.1 was the first one which was more ore less out of the box for me - straight forward and fast to implement - great

Hello Basil, thanks, concerning the rig this was a misunderstanding from my side. So I checked it with your proposal - see below. Thought I found missing arguments - compared to another setting on ano

#upgrade #draws #configuration

Hello Basil,Hello Basil, Thanks for your help and patience. I tried to find out what happens. First I did:pi@draws:~ $ cd pi@draws:~ $ ls -salt .wl2k total 12 4 drwxr-xr-x 35 pi pi 4096 Sep 1 21:33 ..

#upgrade #draws #configuration

Hello Basil did this: pi@draws:~ $ cd pi@draws:~ $ cd n7nix pi@draws:~/n7nix $ git pull remote: Enumerating objects: 22, done. remote: Counting objects: 100% (22/22), done. remote: Compressing objects

#upgrade #draws #configuration

Hello Basil, thanks for your fast response. Tried your proposal: pi@draws:~ $ mgr-ctrl.sh status * draws-manager.service - DRAWSâ ¢ Manager - A web application to manage the DRAWâ ¢ HAT configuration.

#upgrade #draws #configuration

Hello Basil, thanks for the fast response - alle run flawless. Is ti necessary to put the kernel hold again on the image? One thing I faces was the PAT - I had the problem in the past #5725 nresolved.

#upgrade #draws #configuration

Hello on the forum, after few month I found time to play again with the DRAWS and want to finish my started installation. First of all I want to do an update -but this failed cause of PAT and WSJTX in

#upgrade #draws #configuration

Hello Basil, thanks for the update. According to the PAT. I did the script and settings # change grid square and distance in ardoplist.sh cd cd n7nix/ardop nano ardoplist.sh max_distance=150 # default

#pat

Hello, found the fault - I chose the wrong port. correct is the UDRC: cd ~/bin ./piardopc 8515 plughw:2,0 plughw:2,0 -p GPIO=12 Ardop is running but can not find the PAT $ pat rmslist -s -m ardop J re

#pat

Hello, I went further in my installation - next step PAT for Winlink. I went through the installation README and all went smooth till I started ARDOP. I got the error at the end: Opening Playback Devi

#pat

Hello Basil, that's great ... I did this (below my steps and results). It is essential to stop AX25 before. Now the switch between Fldigi and WSJTX is smooth. Great script and very helpful. My next st

#config #wsjtx #audio #install

Hello Basil, thank you very much for your support ... made the update - but problem is after changing the script to only use the KX3 I commented the other radios so only the KX3 line is active. declar

#config #wsjtx #audio #install

Hi Basil, I did a fresh installation (#5710) but the Error on starting Hamlib (4.1) for Wsjtx ist still there. Result before I stopped pulse audio: pi@draws:~ $ rigctld-wsjtx -m 2029 -r /dev/ttyUSB0 -

#config #wsjtx #audio #install

Hi Basil, I went a step back from my goals and installed a fresh NWDR image and did step by step the instructions, also keep the "old" kernel. So far as I can say and the programs I can test: FLrig, F

#applications #database #setup #settings

Hi Basil, Thanks will combine this with my efforts to make an enhanced image for my needs (#5700). I described the error in #5690 - formated as it was in the terminal window. It is the problem, that I

#config #wsjtx #audio #install