Appreciate all the info shared about this product! I don't know about the FT-817, but my FT-857d works great with the latest DRAWS board using an un-modified 6-pin data cable (NO pins removed). Just w

Thanks a million for the secondary download location, William. Pulled down a copy and just booted the Pi-3 / DRAWS to take a look and make sure I had followed the correct setup sequence. Looks like th

#beta #support

I share Jim's question and appreciate your response! However, it still leaves me reluctant to make any alterations, as everything (including 1200 Baud Packet) works perfectly. By everything, of course

#recall #draws

Thanks for all the info that's been shared! Is there a way to identify the affected boards from the O/S? GUI or command line either one? Or, is it just every board with the SMA connector down at the e

#recall #draws

Hey Ed! I believe you're referring to the excellent YouTube videos from KM4ACK. I can't speak to what might have already been installed on the DRAWS Compass image in regard to ARDOP... all I did was f

#draws

Hi Ed! There are two issues to take care of here. As was mentioned, 0.0.0.0 is not the address for you to use. When you are accessing a web page on the same machine you are using, the "loopback" or "l

#draws

Hi Ed! PAT works extremely well on the Pi/DRAWS using telnet, ax25, & ARDOP. The following video walks through the setup and there are many others from the same author going in to more detail on parti

#draws

Sounds great, Basil! We currently have 9600 APRS available with satellite FalconSat-3, so I'll give that a try when there's a favorable pass. With the volume of cubesats being deployed these days, hop

Hi everyone. Just wanted to share that I was able to get digipeated this morning via satellite "AISAT-1" as it passed over the U.S. East Coast. With an FT-857d connected to the DRAWS & up/down freqs b

Great write-up, Mike! Thanks so much for putting that all together in one summary. FYI, I am still using the "draws_beta13.zip" image from http://nwdig.net/downloads/ on a Pi 3 B+ connected to an FT-8

#yaac #replacecompass #draws #install #js8call

If anyone selects the excellent Pi/DRAWS case from C4Labs: https://www.c4labs.com/product/nwdrpi-2-for-raspberry-pi-3b-3b-2b-b-and-drawstm-digital-radio-amateur-workstation-version-2-hat/ ... and woul

I've only had my DRAWS board for a day, but did have success running the PAT Winlink client (thanks to the YouTube videos by KM4ACK) over 2m ax25 packet. I will get around to testing the HF modes but

#winlink