Hi Wim, I would be interested to know what repeater you connected and if all went well to simultaneously use svxlink/echolink and direwolf/aprs on an RPi with Draws. Did you install and configure svxl

Hi Basil, I thought I followed the instructions, but it seems I didn't. After som sleep, I started all over from copying the sd-disk and edited the /boot/config.txtfile and now it seems to be working.

Here is what you specifically asked for pi@draws:~ $ journalctl --no-page -u ax25dev.service -- Logs begin at Thu 2016-11-03 18:16:43 CET, end at Thu 2019-04-18 23:27:45 CEST. -- Apr 18 23:12:15 draws

pi@draws:~ $ journalctl -xe Apr 18 23:17:15 draws direwolf[1909]: Audio device for both receive and transmit Apr 18 23:17:15 draws direwolf[1909]: Could not open audio device default for in Apr 18 23:

If I try to start it (it is not in the path), I am back to starting the mheard service not terminating /home/pi/n7nix/systemd/bin/ax25-start pi@draws:~ $ sudo /home/pi/n7nix/systemd/bin/ax25-start Sta

Hm, there seems to be something more Now the card is there but ax25 is not running pi@draws:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA

Seems to have made the trick..., thanks a lot pi@draws:~/n7nix/bin $ ./hwtest.sh === Verify AudioSense-Pi drivers are not loaded. AudioSense drivers NOT loaded. === Verify Sound Card is found **** Lis

--------- exit pi@draws:~/bin $ cd pi@draws:~ $ cd n7nix/ pi@draws:~/n7nix $ git pull remote: Enumerating objects: 39, done. remote: Counting objects: 100% (39/39), done. remote: Compressing objects:

Here are the logs ----------------- root@draws:/home/pi/bin# systemctl status ax25dev.service ● ax25dev.service - AX.25 device Loaded: loaded (/etc/systemd/system/ax25dev.service; enabled; vendor pres

Hi Basil, I seem to have exactly te same problem with beta12 and my answers to your questions are 1: no, i only get pi@draws:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2

Half success. I have still the FT8900 connected to the left mini-DIN-6 female connector on the Draws board (udr0) and now also my kx3 connected to the right mini-DIN-6 female connector on the Draws bo

#hf #draws

Hi Rick, I do have my Draws hat/Pi3+ up and running, and am in the process of exploring it, but right now using an FT8900 radio rather than the kx2, and I am receiving AX25 packets.. The reason is of

#hf #draws

Sorry if I was unclear. I meant to ask if there is anyone with experience from using Draws together with a KX2. I have an KX3 and KPA100 in my schack, and a KX2 as a mobile. They are both great. But I

#hf #draws

Anyone with experience from using elecraft kx2?

#hf #draws