Date
1 - 2 of 2
Problem getting #wsjtx & #js8call to work #wsjtx #js8call
|
Hi Bob,
toggle quoted message
Show quoted text
First thank you for testing the DRAWS RPi hat, we appreciate all the things that people like you are trying out. If you have a problem it would be much better for you to start a new thread by using a subject line that describes your problem such as: Subject: Problem getting #wsjtx & #js8call to work Perhaps read John's suggestions for using the discussion group here: https://nw-digital-radio.groups.io/g/udrc/topic/using_the_discussion_topics/28813785 I think your problem is that direwolf is running & you need to stop it before you start wsjtx & js8call. cd cd bin sudo su ./ax25-disable reboot Please read this doc https://github.com/nwdigitalradio/n7nix/blob/master/DRAWS_CONFIG.md If you still have problems I will need you to re-enable direwolf so I can more easily get information about what might be wrong. Please read this doc https://github.com/nwdigitalradio/n7nix/blob/master/VERIFY_CONFIG.md Thanks, /Basil n7nix Bob Orrett <boborrett@...> writes: I need help. |
|
|
|
It was mentioned to me that your ALSA inputs might be set incorrectly.
toggle quoted message
Show quoted text
I have updated a script & added a new one that should help with that. - display 5 ALSA controls that are of most interest. alsa-show.sh - Set up ALSA controls that should allow the HF programs to work properly. setalsa-default.sh You will still need to set your ALSA controls, PCM & LO Driver Gain for your deviation depending on which radio you have. You can get the new scripts by issuing these commands in a console. cd cd n7nix git pull then: cd bin ./alsa-show.sh ./setalsa-default.sh /Basil Basil Gunn <basil@...> writes: Hi Bob, |
|
|