Topics

Lego Case for DRAWS #case

J P Watters
 

ordered a SMARTPI Case on amazon. And a DRAWS fits in it. 12V Power cable routes out through an existing hole.

https://www.amazon.com/gp/product/B00UDOZZKI

With a little cutting, drilling, a raspberry PI 3B+ and a DRAWS makes it mountable for my mobile installation, connecting to a Kenwood D700.

LEGO blocks optional.

J P Watters
 

For those who inquired, the bottom of the Lego PI Case remains as it was manufactured.
The top was drilled out for the SMA connector for GPS. Where the pair of 6-Pin connectors contact the top of the case, the top case was cut wide enough for both connectors to protrude through the top case. (IMG_4319) The second photo shows the internal side of the top cutout. In the background of the photo is a unaltered top case. 

stprovost@...
 

Hello, love all the content, but HATE the multi megabyte pictures!!!!!!!!!!!!
can you STOP using large format pictures!!
i keep getting full mailbox errors and can't receive any more emails.
thank you for your consideration.
stephen

-------- Original Message --------
Subject: Re: [udrc] Lego Case for DRAWS #case
From: "J P Watters via Groups.Io" <kc9kko@...>
Date: Wed, April 10, 2019 1:28 am
To: udrc@nw-digital-radio.groups.io

For those who inquired, the bottom of the Lego PI Case remains as it was manufactured.
The top was drilled out for the SMA connector for GPS. Where the pair of 6-Pin connectors contact the top of the case, the top case was cut wide enough for both connectors to protrude through the top case. (IMG_4319) The second photo shows the internal side of the top cutout. In the background of the photo is a unaltered top case.