Topics

Setting Up AARDOP with the #draws

Basil Gunn
 

Ed Bloom, KD9FRQ via Groups.Io <ewbloom=verizon.net@groups.io> writes:

As a followup to setting up PAT with the DRAWS....

Is the ARDOP install that comes with teh DRAWS Compass package
"installed" and available to PAT once PAT is installed?
DRAWS Compass refers to the current and now deprecated image.
That image does not have piardopc installed.
The next image most likely will since I am working with paclink-unix &
ardop on the RPi.

I ask because I see ARDOP available in the drop down of PAT.

If not, what does it take to active the ARDOP install in Compass so PAT
would see it without installing it again (using K4KDR instructional
video, for example)?
John Wiseman's documentation is excellent and I had no problems getting
it to work with UDRC or DRAWS on an RPi.

http://www.cantab.net/users/john.wiseman/Documents/ARDOPC.html

Below are my brief notes for using an UDRC II. The only thing to be
aware of for the DRAWS hat is the gpio setting for left or right mDin6
connector.

Command line used to start piardopc

./piardopc 8515 plughw:1,0 plughw:1,0 -p GPIO=23

Added this to .asoundrc
ref: ARDOPC.txt

pcm.ARDOP {
type rate
slave {
pcm "hw:1,0"
rate 12000
}
}

/Basil

Ed Bloom, KD9FRQ
 

AH...........Yes, KM4ACK.............
 
Coffee had not kicked in yet....................
 
Ed Bloom, KD9FRQ
ewbloom@...
Sent from Webmail access
 
 

-----Original Message-----
From: K4KDR <scott23192@...>
To: udrc <udrc@nw-digital-radio.groups.io>
Sent: Mon, Sep 16, 2019 8:44 am
Subject: Re: [draws and udrc] Setting Up AARDOP with the #DRAWS

Hey Ed!

I believe you're referring to the excellent YouTube videos from KM4ACK.

I can't speak to what might have already been installed on the DRAWS Compass
image in regard to ARDOP... all I did was follow the steps in the KM4ACK
videos for both ax25 & ARDOP and both methods are working perfectly for me.
(I am also using the DRAWS SD Card image but followed the KM4ACK steps to
get those 2 PAT protocols configured & working)

-Scott,  K4KDR

=============================

-----Original Message-----
From: Ed Bloom, KD9FRQ via Groups.Io
Sent: Monday, September 16, 2019 7:20 AM
Subject: [draws and udrc] Setting Up AARDOP with the #DRAWS

As a followup to setting up PAT with the DRAWS....

Is the ARDOP install that comes with teh DRAWS Compass package
"installed" and available to PAT once PAT is installed?

I ask because I see ARDOP available in the drop down of PAT.

If not, what does it take to active the ARDOP install in Compass so PAT
would see it without installing it again (using K4KDR instructional
video, for example)?

Respectfully,

Ed, KD9FRQ




K4KDR
 

Hey Ed!

I believe you're referring to the excellent YouTube videos from KM4ACK.

I can't speak to what might have already been installed on the DRAWS Compass image in regard to ARDOP... all I did was follow the steps in the KM4ACK videos for both ax25 & ARDOP and both methods are working perfectly for me. (I am also using the DRAWS SD Card image but followed the KM4ACK steps to get those 2 PAT protocols configured & working)

-Scott, K4KDR

=============================

-----Original Message-----
From: Ed Bloom, KD9FRQ via Groups.Io
Sent: Monday, September 16, 2019 7:20 AM
To: udrc@nw-digital-radio.groups.io
Subject: [draws and udrc] Setting Up AARDOP with the #DRAWS

As a followup to setting up PAT with the DRAWS....

Is the ARDOP install that comes with teh DRAWS Compass package
"installed" and available to PAT once PAT is installed?

I ask because I see ARDOP available in the drop down of PAT.

If not, what does it take to active the ARDOP install in Compass so PAT
would see it without installing it again (using K4KDR instructional
video, for example)?

Respectfully,

Ed, KD9FRQ

Ed Bloom, KD9FRQ
 

As a followup to setting up PAT with the DRAWS....

Is the ARDOP install that comes with teh DRAWS Compass package "installed" and available to PAT once PAT is installed?

I ask because I see ARDOP available in the drop down of PAT.

If not, what does it take to active the ARDOP install in Compass so PAT would see it without installing it again (using K4KDR instructional video, for example)?

Respectfully,

Ed, KD9FRQ