Topics

AX25 Status Problem


Jason Godwin (KG5TMP)
 

Greetings,

I am completely new to DRAWS, and I've run into my first problem. I am attempting to run this with a Yaesu FT-891, and I'm using all the supplied cables. The USB cable is my own. Anyway, I'm at the part that says: 

Open another console window to the pi and as user pi type:
 
ax25-status -d
 
After == failed & loaded but inactive units== you should see
 
 0 loaded units listed.

This did not happen. Under that section, I see: " draws-manager.service loaded failed failed DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration." Which doesn't sound good. So if I do not get the "0 loaded units listed," what next? It almost sounds like there's some service not running that should be running.

When I run "sudo systemctl status draws-manager" this is the output:

draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration.
   Loaded: loaded (/etc/systemd/system/draws-manager.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Wed 2020-08-12 16:09:45 CDT; 57s ago
     Docs: https://github.com/nwdigitalradio/draws-manager
  Process: 3557 ExecStart=/usr/bin/npm start (code=exited, status=1/FAILURE)
 Main PID: 3557 (code=exited, status=1/FAILURE)

Aug 12 16:09:45 kg5tmp npm[3557]: npm ERR! errno 1
Aug 12 16:09:45 kg5tmp npm[3557]: npm ERR! webapp@0.0.0 start: `node ./bin/www`
Aug 12 16:09:45 kg5tmp npm[3557]: npm ERR! Exit status 1
Aug 12 16:09:45 kg5tmp npm[3557]: npm ERR!
Aug 12 16:09:45 kg5tmp npm[3557]: npm ERR! Failed at the webapp@0.0.0 start script.
Aug 12 16:09:45 kg5tmp npm[3557]: npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
Aug 12 16:09:45 kg5tmp npm[3557]: npm ERR! A complete log of this run can be found in:
Aug 12 16:09:45 kg5tmp npm[3557]: npm ERR!     /root/.npm/_logs/2020-08-12T21_09_45_656Z-debug.log
Aug 12 16:09:45 kg5tmp systemd[1]: draws-manager.service: Main process exited, code=exited, status=1/FAILURE
Aug 12 16:09:45 kg5tmp systemd[1]: draws-manager.service: Failed with result 'exit-code'.

 Any help is appreciated!

73 de KG5TMP


Basil Gunn
 

Having the draws-manager error out will not affect ax.25/direwolf.
You probably should run and paste the console output of these commands:
manager-sysd.sh status
then:
manager-sysd.sh stop

This will give John more output to help him debug the draws-manager
problem.

I am more interested in if ax25-status came back OK or not in case the
draws-manager failure is a symptom of some other problem. Please cut &
paste the output of these commands:

aplay -l
uname -r
showudrc.sh
ax25-status -d


Jason Godwin (KG5TMP) <@kg5tmp> writes:

Greetings,

I am completely new to DRAWS, and I've run into my first problem. I am
attempting to run this with a Yaesu FT-891, and I'm using all the supplied
cables. The USB cable is my own. Anyway, I'm at the part that says:

Open another console window to the pi and as user pi type:

ax25-status -d
After == failed & loaded but inactive units== you should see
0 loaded units listed.
This did not happen. Under that section, I see: " draws-manager.service
loaded failed failed DRAWS™ Manager - A web application to manage the DRAW™
HAT configuration." Which doesn't sound good. So if I do not get the "0
loaded units listed," what next? It almost sounds like there's some service
not running that should be running.