AX25 Status Problem
Jason Godwin (KG5TMP)
I am completely new to DRAWS, and I've run into my first problem. I am attempting to run this with a Yaesu FT-891, and I'm using all the supplied cables. The USB cable is my own. Anyway, I'm at the part that says:
Open another console window to the pi and as user pi type:
After == failed & loaded but inactive units== you should see
0 loaded units listed.
This did not happen. Under that section, I see: " draws-manager.service loaded failed failed DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration." Which doesn't sound good. So if I do not get the "0 loaded units listed," what next? It almost sounds like there's some service not running that should be running.
When I run "sudo systemctl status draws-manager" this is the output:
draws-manager.service - DRAWS™ Manager - A web application to manage the DRAW™ HAT configuration.
Any help is appreciated!
73 de KG5TMP
Having the draws-manager error out will not affect ax.25/direwolf.toggle quoted messageShow quoted text
You probably should run and paste the console output of these commands:
This will give John more output to help him debug the draws-manager
I am more interested in if ax25-status came back OK or not in case the
draws-manager failure is a symptom of some other problem. Please cut &
paste the output of these commands:
Jason Godwin (KG5TMP) <@kg5tmp> writes: