Date
1 - 7 of 7
lost audio output on draws hat #draws
|
okiejim
I have lost my audio output. I noticed I was no longer showing up on aprs.fi. I just started using beta13. I went to ft-8 to use tone on 2m fm. I can not hear a tone on my other rig. PTT is fine and radio is keyed up. I hear that on other rig. I have attached my showudrc.sh file. I see dmesg showing codec not registering is this what is wrong?
[Typos corrected]
|
|
|
|
I will comment after I see your showudrc.sh console output. Please attach.
toggle quoted messageShow quoted text
/Basil okiejim <kd6vpe@gmail.com> writes:
I have lost my audio output. I noticed I was no longer showing up on
|
|
|
|
okiejim
Sorry I guess the attachment did not work yesterdat
On Mon, Jun 10, 2019 at 4:27 PM Basil Gunn <basil@...> wrote:
|
|
|
|
Hi,
Your console output of showudrc.sh shows the device is running as expected. Which radio are you using (Yaesu FT-847?) Are you using the 2M/440 radio in that radio? Assuming you are, check the direwolf/ax25 status, run this command from your console ax25-status Send me the console output. All processes should read RUNNING and ENABLED If they are not then run ax25-start Send me the console output of this as well. I am not sure about the FT-847 but on the FT-817 I tested I had to remove the squelch pin (pin 6) on the mDin6 connector but that was for HF SSB AFSK operation. I have lost my audio output.Just to be clear I am assuming you are talking about the DRAWS audio codec and not the on-board RPi audio codec? /Basil Sorry I guess the attachment did not work yesterdat
|
|
|
|
okiejim
Thank you Basil,e I will look into the pin 6 issue further then. Last night I did get it to send a tone from FT-8 screen with the tone button. I only saw it on the radio. Was not able to verify it send anything but I'm pretty sure it did. This was a one time shot though. The next time I hit the button no output. Had to restart software and radio and it went once. Might just be the SQL. I will try somemore today. I really is most likely me. These new things take awhile for me to comprehend these days. I also tried to get the flrig gui to come up but unsuccessful with that. FLdigi comes up. What have I missed here?
On Tue, Jun 11, 2019 at 2:14 PM Basil Gunn <basil@...> wrote:
|
|
|
|
okiejim
I tried to apt-get insall flrig and it says already installed. When I try the Icon it does not start. When I try flrig from command line i get flrig: error while loading shared libraries: libjped.so.9: cannot open shared object file: No such file or directory
On Wed, Jun 12, 2019 at 9:24 AM okiejim via Groups.Io <kd6vpe=gmail.com@groups.io> wrote:
|
|
|
|
Hi Jim,
My apologies for the slow response. There will be days or weeks this summer where I will be unable to respond to the forum since I will be hiking & camping, etc. When you have a new problem it is better if you start a new thread in the forum rather than replying to the last message you sent. Also please include your console output along with a description of your problem. Providing the console output of running flrig from the command line would have been helpful. I can't find any reference to libjped.so.9. I think you mean libjpeg.so.9. If you search the groups.io udrc forum for libjpeg you will find your answer. https://nw-digital-radio.groups.io/g/udrc/message/3285?p=,,,20,0,0,0::relevance,,libjpeg,20,2,0,31250917 I tried to apt-get insall flrig and it says already installed.Most of the HF apps either do NOT have a package or have a very stale version that you can install. They are updated by their authors often & I have a script that tracks their version to keep your RPi image current with the latest changes for those programs. You can see which programs I build from source here: https://github.com/nwdigitalradio/n7nix/blob/master/docs/IMAGE_README.md If you want to check that your installed HF programs are current then run: prog_refresh.sh -c js8call: current version: 1.0.1, installed: 1.0.1 wsjtx: current version: 2.0.1, installed: 2.0.1 Library: libflxmlrpc IS loaded. flxmlrpc: current version: 0.1.4, installed: 0.1.4 fldigi: current version: 4.1.03, installed: 4.1.03 flrig: current version: 1.3.45, installed: 1.3.45 flmsg: current version: 4.0.8, installed: 4.0.8 flamp: current version: 2.2.04, installed: 2.2.04 xastir: current version: 2.1.1, installed: 2.1.1 gp_verchk.sh: Detected gpsd package. gpsd: current version: 3.18.1, installed: 3.18.1 If you want to update the HF programs then run prog_refresh.sh -u This script could take a very long time (hours) depending upon how many programs will be updated ie. built form source. If you have problems please cut & paste all of the console output in an email to me. /Basil okiejim <kd6vpe@gmail.com> writes: I tried to apt-get insall flrig and it says already installed. When I try
|
|
|