Release image nwdr15 Jan 23, 2020 last image nwdr14 Oct 07, 2019 Latest RPi image current_image.zip has been updated to nwdr15.zip at this location: http://images.nwdigitalradio.com/downloads There we

J P, I'm not very motivated to write a configuration back-up program. The following is my thinking, flawed as it may be. 1. I can regen any of my RPi units from a blank mSD card in 30 minutes or less.

With NorthWestDigital radio Debian image nw14, AX25 over UDP is not working. Although configuration is correct there is no frames transmitted nor received via the axudp interface. After reinstalling A

John, I saw that you referenced that you were able to run 9600 and or 1200 on a single radio interface. Can you refer us to the code, configuration that allows for on the fly switchng between Direwolf

Is there a guide for setting up the DRAWS hat with Buster? I started with a clean image, and tried to enable the DRAWS by adding `dtoverlay=draws` to the /boot/config.txt file, but when the pi starts,

k7udr posted: "We are on track to receive the final prototypes Feb 15th, at which time we can place the production order for the Early Adopter and production cases. Thanks for your patience." New post

I recently added a Xiegu G90 to my "shack" and I want to set it up with my DRAWS hat. I believe I've figured out the right way to connect it up, currently via the CE-19 adapter board, but I'll probabl

Morning, I found this morning a bunch of UDRC boards that I "lost" in a house move. A project that I put on the long finger quite a while ago was a DMR to Analog Bridge to get our local Analogue Repea

Ordered a draws and gps antenna on the first, I know you guys weren't back till this week, i was wondering on the shipping timeframe? Charlie

Greetings. Just letting all the Pi users doing APRS with their UDRC and DRAWS hats know that there is a new build of YAAC ("Yet Another APRS Client") with a new optional feature to better support smal

Attempting a core_install using the alternate method on my unit number 2, I used the "Install Everything" method on Unit number 1 with success. However this time I am experiencing an issue with the co

Here is as far as I can get. The rig has no memory channels programmed. Is that still an issue? I think I put all files and scripts in the proper directories, at least there are no more complaints abo

I don’t know where to go from here. I‘ve been studying the very interesting auto-rmsgw-find.sh script. I tried some of the rigctl commands with TM-V71a. Nothing but timeouts. My cable is rts with the

https://github.com/nwdigitalradio/n7nix/blob/master/docs/RMSGW_DAILY_CHECK.md /Basil n7nix

I’m looking for guidance in setting up my RPi4b with my new DRAWS Hat. My low brow solution to the following was to buy an RPi3. On the Pi4b, the piwiz updater keeps giving an error, says a file is “n

Just getting started with my Winlink HF Gateway project. Can I use DRAWS Hat and a PI to run a HF RMS Gateway incl. VARA ,Winmor etc. ? I believe the included Linux RMS Gateway is just for VHF/UHF AX.

An RPi3 plus an older draws hat is running with nwdr14 and adc gain set to 0 dB. Audio knob from the radio is set to give an average level of 50 in received direwolf packets. An RPi4 plus the new draw

I was asked thia moring if the gateway config on DRAWS is running RMS packet and/or RMS Relay. I am unsure how to answer that Also, you mentioned offering directions on how to update the advertised fr

k7udr posted: "Working thru delays in moving product in/out of China. Should have final prototypes this month. Hopefully production in November. Thanks for your patience, Bryan K7UDR" New post on NW D

Hi, Having installed recently last available NorthWest digital radio image nw14dr.img I got an excellent Linux system on a RaspBerry Pi 4. Just after booting fresh new system I checked different appli