Hi everyone. Just wanted to share that I was able to get digipeated this morning via satellite "AISAT-1" as it passed over the U.S. East Coast. With an FT-857d connected to the DRAWS & up/down freqs b

Basil, I have been under the weather for a bit, I see that the Draws Beta 13 is still the base image. Our last exchange was that you were going to tidy up the URONODE install script and get to LINFBB

Here's a video if you are interested in setting up Pat Winlink for HF email on the DRAWS hat. https://youtu.be/LnJQv6rDpss 73, KM4ACK Find me on YouTube

Is anyone using the DRAWS Pi HAT for HF email that would be similar to ARDOP (part of WinLink) or WinMor (also part of WinLink) that both run under Windows? I'm using an FT857D, a Pi 3B+, a DRAWS boar

If anyone selects the excellent Pi/DRAWS case from C4Labs: https://www.c4labs.com/product/nwdrpi-2-for-raspberry-pi-3b-3b-2b-b-and-drawstm-digital-radio-amateur-workstation-version-2-hat/ ... and woul

Well, I tried it at first with my FT-897D, got no audio, then tried switching to an Icom IC-706MkIIG… still no joy. I was using arecord/aplay and netcat for testing. I have a Pi 3 with a UDRC-II board

I am using DRAWS software version "DRAWS_BETA13" from May 7, 2019. I connected to DRAWS MANAGER and set the receive & transmit levels there. I am using a single 6 pin miniDIN cable plugged into the le

Hi all, The DRAWS board arrived yesterday evening, and today I picked up a new Raspberry Pi 3 to connect it… so far things seem to be working but I'm yet to hook up a radio. Now, with the predecessor

It works. Just as you said it would. And I had a ton of fun getting it there. Thanks, Alan . KJ7BFC

Is #DRAWS a drop in replacement for the UDRC2 used with a DR1X? Tom Joneson w2tlj

I connected the Draws to my 12v battery box and nothing happens. It boots normally, when I supply power to the Pi. Are there troubleshooting instructions? Thanks, Stuart, K2YYY

Hi all, Is there a mirror of the Compass Linux for the new DRAWS board? At the moment I'm downloading the "draws_beta13.zip" image off of nwdig.net. The Internet connection at my workplace is a 50Mbps

I am very proud interested in trying to get a DRAWS connected to my new BTech 6X2 DMR radio..... And use WinLink and JS8Call on the DMR on a private direct radio to radio connection. Any suggestions w

Just wondering, I know people have gotten wsjt to work with cat control or usb control, but has anyone gotten a work around to use the gpio pins for the ptt? the main reason I ask is that when i switc

I have uploaded a new 3D printable DRAWS case to Thingiverse https://www.thingiverse.com/thing:3783961. This is a case for Raspberry Pi 3b or Raspberry Pi 4b + NWDR DRAWS hat with GPS port on side. It

Hi there, So after a lot of help from this Group.. (Thanks again Basil !) I have Winlink email setup. I'm learning that other than my email address (N7KJK@...) I'm not really using Winlink software. I

The DRAWS beta 9 image comes with FLDIGI-4.0.18 installed. There are much newer FLDIGI release available so I tried to compile and install FLDIGI-4.1.02.29 and that failed. I downloaded the FLDIGI-4.1

I've been trying to get my Raspberry Pi 4 working with my DRAWS hat but I think either my connection is messed up or my audio setup / levels wrong. I've followed the Google Doc on how to set up your P

Hi all, Silly thought just occurred to me… one sore point with the Raspberry Pi is that the device provides no audio I/O apart from the PWM audio output. Now, the UDRC/DRAWS is a big improvement on th

I just loaded the latest image for DRAWS and have things working, however when I attempt to launch Flmsg, I get an hour glass that runs for a while and then nothing happens. We all use FLmsg weekly in