Hi folks, I have performed my experimenting with the Draws now from the first shipment and need to move on to another project. I have it for $129 shipped, Priority Mail USA Details here: https://forum

Hello I am running the newest release of compass with a RPi3. If I leave it running to digipeat the video will stop. I am using the HDMI out on the RPi3 and it will not come back without a reboot. thi

As I eagerly await the arrival of my second DRAWS, I am looking for some basic HF rigs that I can use for primarily for Winmor and ARDOP in parallel. I was considering the micro Bitx unit with the Jac

Hello, To better understand the settings for my audio, the /bin/sndcard.sh item was executed. Some errors were noted. What impact do these below errors have on operation? ------------- copied section

Hello, I need help with XASTIR or YAAC. On beta 10 and 11, I was able to connect using udr0 or udr1 by just typing it in the device selection. In the beta12 when selecting in the XASTIR AX.25 TNC devi

I'm looking to make a cable for my 281 so I can get APRS up and running. Here are my thoughts: DIN PIN Purpose Radio PIN 1 AFIN 6 2 GND 5 3 PTT 4 4 DISCOUT N/C 5 AFOUT Rear Speaker Ring 6 SQL N/C Kenw

I’ve found wsjt-x 2.0 and it is running. I can receive and decode FT8 from my 817. I’m having trouble figuring out how to set up rig control. I’d be happy without rig control and just have the wsjt pr

I have been interested in SSTV since at least the early '70s, and have operated it from time to time. I thought it might be fun to give it a try on DRAWS™. It is not included on the beta images, but f

To all of our DRAWS Early adopters: I’m recovering well from the beating I’ve taken over the last day, thanks for asking. The Problems: First the easy one, Power Pigtail: The board was designed with a

I see today that there is a new version of FLDIGI. Can you show me (us) how to check for newer software and up load/install? Tnx Lynn

Basil, I started playing with fldigi - it configured properly and worked except... flrig fails with a blank stare.(hourglass... then nothing) in the X GUI When run from the console window see msg: err

Is anyone using Direwolf with GPSD with the DRAWS board? I've compiled Direwolf from source, then updated the config to have "GPSD localhost" and some TBEACON commands, when I restart Direwolf, I see

Some other HAT boards will accept it, without damage or problems, even if the HAT board can supply Raspberry Pi with 5 V DC.

I'm setting up DRAWS with Beta 12. I'm following the steps listed here: https://nw-digital-radio.groups.io/g/udrc/wiki/DRAWS%3A-Getting-Started The radio that I'm using is Yaesu FT-817. I'm at the poi

Well an interesting day, initially tried the update script and after that the draws driver just wouldn’t load, so I cut my losses after a few hours and cut a new image to a fresh SD, same problem, rev

Before you update your image, please capture any configuration changes you might have made like current alsamixer settings. Run alsa-show.sh & make a copy of result. Note a minimum microSD card size o

Built into the Draws Image is URONODE Running the install script appears to be missing the configuration files. Where are the configuration files supposed to be? ie /etc/ax25/ or /usr/local/ax25?? Has

Jack, Like you, I have been the product of the support that Basil has rendered. His support is awesome. If I could I would send him coffee, beer or other favorite beverage. But that means I would have

Hi Jack, When I installed my first DRAWS release (v8 IIRC), I had problems with the sound driver, too. But at every startup there were different errors at, this was strange. When I had a look at the K

Are any of the first run aluminum DRAWS available for purchase? I would like to get two rather than the acrylic version.