Budd   Thank you for your message.   I have a UDRC-II and Yes GND is on SV4 pins behind the DB-15 but +12v is not printed on this version. Suspect it will be through plate hole 15 & 16 on SV4 but

Hi John, I am successfully using the ircNodeDashboard with Compass Linux on a RPi 3 and the UDRC. I remember having a few issues at first with some updated file versions, but unfortunately did not

The Buck Regulator on the UDRC-II is a TI design rated at 5.1V 3 amps continuous as recommended by the Raspberry Pi foundation. It Backpowers the Pithru an ideal diode and suffers no voltage drop due

Of course I recognized that an 8GB SD card isn't really 8GB, but I sort of expected that all the manufacturers would use the same sleazy math to inflate their size.  Not so. The reason this is import

Jeremy When timeserver is closed after running from terminal the following error is given. pi@compass:~ $ sudo timeserver 1 13:39:18: Debug: 1 threads were not terminated by the application. pi@co

Bryan   DB-15 wired up to 5 Gnd and 15 +Ve and working well. 5V level at 4 & 6 GPIO is 5.07V - 5.08V checked on three different digital meters. Not 5.1 or higher.   Audio cut-out problem still e

Hi Everyone,       The DR1-X TX the ID (Callsign) in Dstar after letting go of PTT.  No TX while PTT is pressed only after letting go of PTT.  The DR1-X goes to Fix TX and Fix RX while receiving Dst

Hello group. I had an offer of help but it was a private message and I do not know who it was now, sorry. I am on the compass image sending this so cannot refer to my Windows email PC. Please reply

Dan   I have the dashboard running well now and started to html edit to customize it for my needs. Take a look on http://zl2twt.ddns.net:82 and see what you think.   Thank you for your help.  

John, It looks very good. I’m glad it worked out for you! 73, Dan — AI2M

Hello all, I just tried out my first II Model and it must need something updated on the image I have. I would like to use the SD card set up I have running on the UDRC, I thought it might be a drop i

I have two UDRC's  in operation. One in at my home operating as a UHF Hotspot, KR4PI B. The other at our local EOC on DR-1X repeater, W4LCO B. The repeater is setup with a registered connection to the

Just got a UDRC2 and set it up following the instructions on the Wiki. Xastir is unable to transmit, but the pbeacon in Direwolf transmits just fine. I can see the line of fuchsia text Xastir sends

The dstarrepeater program has the ability to tack on a secondary message as part of the ACK at the end of a D-STAR transmission.  The wonderful Kenwood TH-D74A does not handle it properly causing an e

Does anyone use APRSIS32? Now I need to get that program also working since it has the same problem as I had with Xastir. But I can not figure out how to set the "Radio Transmit Port" in APRSIS32.

I bought a UDRC-II, Rasberry PI-3B (with 15pin cable), and Yaesu DR-1X repeater.  Do I need a DV-dongle, (ThumbDV, DV4mini, etc.) for the repeater to work with D-Star? Will the audio stream, from th

Just wanted to reach out to the group to see if anyone else has experienced the following: Soundcard reverts back to bcm2835, and the PCM level is reset to 0 (zero) This occurs sporadically, and

I got a test harness made and everything seems good so far but there is an audio issue. I have the TKR-850 set to narrowband and the db25 pins programmed correctly. There is d-star audio going throu

Hello Om's... We use a DR1 Repeater here with the UDRC II Board and D-Star + a DV4mini as Dongle for C4FM linked to the FCS Network. All works perfect...But is it possible to set a follow up time loc

Working with a 1.10Q repeater.  Able to see network traffic but nothing comes out of repeater.  W0KEV B shows up in XRF002A dashboard.  Any help?