I had Duane send me his configuration file. Somewhere along the way, his sound card transmit got switched to the sound chip on the Raspberry Pi, so when the PTT keyed the output modem tones were not

Illustrations showing the required UDRC dstarrepeater settings, which you may find useful if using the GUI version. There is also a slide for alsamixer showing the audio settings. Use this as your st

I know this question has been presented before, but has anyone played around with trying to use the URDC with an external controller?   Could the audio paths be switched in and out with relays that is

I know we are waiting on modification to the DStarrepeater software for the raspberry Pi to work with the UDRC for hotspots but I cannot help but tinker with what we have. I have managed to configure

I had my UDRC working beautifully with Direwolf and my FTM-100D. Both TX and RX of packet data worked without any issues. I was able to connect to the Kiss port with RMS Express on my Windows Desktop

I am trying to get the UDRC running as a hotspot.  I don't have a monitor or keyboard for the Pi so I am attempting to do it headless (which I have don before with VK4TUX Fedora image).  I can't seem

Good Morning to all, My URDC is in transit and I should receive it in a few more days, The question I had is this: going through the instillation I see to set up Dstar repeater you use the command,

On YouTube By Jeremy McDermond NH6Z -- John D. Hays Director PO Box 1223, Edmonds, WA 98020-1223

The UDRC Wiki documentation and one of Jeremy's Youtube videos refer to the use of systemd to start/stop/restart these programs.  The service units for these programs do not seem to be included in the

The YouTube tutorial for the DR-1x is great!  Thanks.  I followed it and got dstarrepeater working.  At the point in the tutorial that you check for updates, my Pi found 50 updates and I applied them.

Newly updated and added packages. dstarrepeater dstarrepeaterd Includes support for simplex dstar nodes (hotspots).  Use the Soundcard udrc and the UDRC controller configuration option 5 Settings

Hello - Per this post:  https://nw-digital-radio.groups.io/g/udrc/messages?expanded=1&d=&msgnum=72 The drive values are set by this script: curl -L -s https://goo.gl/h04nla | sudo sh Which include

What is the best way to install timeserver and have it start automatically? Thanks Bill

John Hays posted: "John's Presentation at Hamvention® 2016. " New post on *NW Digital Radio* <http://nwdigitalradio.com/?author=2> The $800 Tri-Mode Repeater: UDRC™ + Yaesu DR-1X <http://nwdigitalrad

John: Since I am just learning the raspberry pi operating system I was wondering since I have a  earlier version of the compass. What are the commands that I need to update the software needed from w

How can I get VNC to work with the Compas setup, seems I can't VNC into the raspberry Pi2 using VNC, is there a description on how to install and setup VNC on the pi so I can remote into it to setup t

I logged out of my pi instead of rebooting, have password but what is the user name to use when logging back in :( Any suggestions Otherwise I going to have to just start from scratch with a new imag

I've been working on getting the UDRC setup and running with the DR-1X the last couple of days but  haven't been successful.  When running the script to set the levels in alsa I get two errors that re

I have the UDRC and DR1-X working as the wiki instructs.  A couple of items are not discussed in the wiki, so I pose these questions: 1.  What are the pros and cons of enabling the DR1-X repeater ID

Good Morning all, So far I have my repeater 1 setup on DR1X B module and I have a GMSK modem on repeater 2 setup on simplex. I setup ircddbgateway and started and enabled it:  "sudo systemctl start