I received my club call today so ready to start with the  UDRC setup… running into the following there major issues… Someone please help me troubleshoot this #1: pi@compass:~ $ aplay -l **** List of P

Using my UDRC for packet with Alinco DR-135 Mk III and RMSExpress. As the radio has a DB-9 connector, not a 6 pin mini din, I had to re-terminate one end of the supplied cable. Here is the wire colo

The image is missing the anacron package, so logs will not be truncated and saved.  I think all of the Raspberry Pi images are like this. To fix: sudo apt-get install anacron Then the cron entries

A couple of folks have asked about configuring WiFi. While that is outside of NW Digital Radio's support, here's a decent blog post -- http://qdosmsq.dunbar-it.co.uk/blog/2016/01/raspberry-pi-pizero-

I decided today to create a new fresh install image to have as a backup should I break something or corrupt my SD card. Everything installed fine and was configured fine with the exception of Direwolf

Looking for some tips on how to troubleshoot and correct some audio problems.  I am running DR-1X repeater with UDRC, Raspberry Pi 3, Compas full build. Analog repeats fine, but DStar does not repeat

https://nw-digital-radio.groups.io/g/udrc/wiki/Configuring-ircDDBgateway -- ------------------------------ John D. Hays K7VE PO Box 1223, Edmonds, WA 98020-1223 <http://k7ve.org/blog> <http://twi

I've added a bit to the Wiki <https://nw-digital-radio.groups.io/g/udrc/wiki/Configuring-ircDDBgateway> section port forwarding --------------------------------------------------------------- Get t

Just an idea for folks... I purchased an inexpensive USB wifi modem (I bought mine at the PX on base). It shows up (using lsusb) as: Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter Sold

I like to make notes when I am on new technical adventures. The attached document is the product of my notes reflecting the process I have used to get my UDRC up and running, configured according to m

If I connect the UDRC to the discriminator output and unprocessed transmitter input, which are necessary for 9600 bps operation, will 1200 baud signals be handled properly with no pre-emphasis or de

Good Morning, I seem to have my URDC DR-1x configured and working properly after starting from scratch. All seems to be working great nowand I am just working on my dashboard and seem to have it almo

I obtained a club call sign for my DSTAR 'repeater' I have been building with a UDRC and I have registered that callsign on another local DSTAR repeater so it would be part of the USTrust network. Thi

I recently secured a Kenwood TM-G707a for use with my UDRC. I little bit more touching on Alsa settings but working perfectly. I had to adjust the audio settings to: PCM 2.00dB ADC -5.00dB LOL 0.0

Hello,  Our club is running the DR-1X firmware version 1.00f, now upgraded to 1.00t. We have it setup in tri-mode C4FM/D-Star/Analog. It works great when it's working! From time to time, the repeat

Our UDRC was put in service at one of our DR-1X repeaters that only operates fixed digital in and fixed digital out mode.  We do not use Auto/Auto as our repeaters were originally installed as digital

Good Afternoon I went to the North West Digital Radio web site to purchase another UDRC for permanent installation on one of our ARES DR-1x repeaters.  When I got to the order form to select the cabl

Well today we installed my UDRC on one of our ARES DR-1x repeaters. Software version 1.10d.  I took my setup for a hotspot and changed the dstarrepeater configuration to reflect it was now connected t

I looked around a bit on the github and downloaded what I think is the source for the kernel, but I didn't see a config file which can be used by menuconfig. Is one available? 73 Steve/k5okc

"9.6Kpalousa" Event When: Friday, 9 September 2016 Where: Valley Camp, North Bend, WA Description: