Have followed the wiki install for setting the UDRC up on a PI Using a RASPBERRY PI 3 Won't work- error message that I have received in the /var/log/opendv/dstarrepeater_1.log file is as listed bel

So a couple questions.... We have the urdc working on a dr-1z v 1.10j  we are rx good packets and it acknowledges with  MSG:not linked...  we had to adjust alsa from 38 to 48 to get good decode on id

Jason, Sorry you are having difficulties. I understand that you have a repeater with the older firmware -- let's just be sure it is a DR-1X and not a beta DR-1? We recommend sending your repeater b

I am pleased to report that the popular multi-function YAAC program works with the UDRC™. In configuration on YAAC you can use AGWPE or KISS over TCP. Brief installation instructions can be found in

Anything that uses ircddbgateway Here is a little procedure to change all IP based REFxxx references to use their DNS name instead. (For Compass Linux location for DPlus_Hosts.txt file) == watch for

I wondering if I have a bad UDRC. My UDRC has very low audio out from the LOR pin (TONEIN) on the codec.  I have to set the DAC and Line Output amp to max gain just to hear any thing.  The resistanc

[image: Inline image 1] [image: Inline image 2] Ted McArthur AC7II kb7pab@... 435-770-9169

I have finally been able to setup my UDRC to use my Kenwood TH-f6a as the radio. This setup works for both Direwolf packet and Dstar Hotspot.   The settings are: D-Star Repeater Modem Sound Card R

New content added to the Wiki page <https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-and-Direwolf-Packet-Modem#Adding-a-GPS-Using-GPSD> explaining how to add a GPS for position tracking an

Does the Compass image automatically expand the file system on the SD card or is it necessary to expand it after installation using raspi-config? Thanks, KC8MLB

I have a DR1X with the UDRC and on the reflector dashboards it shows up as a hotspot rather than a repeater.  What's up with that?  Have I got some configuration wrong?  Registration error?

It’s time to move from 1200 bauds (it’s been 38 years). NW Digital Radio will setup a test bench at the Northwest APRS Summer Gathering (Sep 9-11 at Valley Camp) to help get stations operating at 9600

WE took a small break from this issue, but there is a delay of 5 secounds before the dr-1x switches over to fm fixed from AMS, the messgae coming back gets chopped off. Have not been able to use the U

I am trying to get a UDRC to work with a DR-1Xe using a Raspberry Pi 3 following the instructions here: https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-Setup-for-the-Y aesu-DR-1X-Repea

Has anyone found a case for the Raspberry Pi which has enough room for the UDRC? I have one which will work if I cut off part of the top and one side but wondered if there was something available w

So I have it installed and it's decoding on receive but no audio on the output except for a beep at the end of the repeated transmission. DR-1X on UHF with UDRC on a Rpi3 and 15 pin cable. LOL is no

I'm going to try compiling the latest code. Are there any switches needed for the DR-1X? -Michael

This one takes a little modification but works pretty well. https://smile.amazon.com/gp/product/B016954T3I/ In the pictures you will see two RCA jacks in an opening.  You will need to remove the two "

Since our new D-Star repeater which utilizes the UDRC on Dr-1X repeater is owned by our local Ares group we are interested in configuring D-Rats on the repeater and Raspberry Pi.  I have enabled D-Rat

Randy does good work and has made cables for connecting two radios to the UDRC II which work well.  See: https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-II-Cabling-For-2-radios#Custom-ma