Mheard prints nothing except a header with "Callsign Port Packets Last heard". There are no error messages. I looked at /var/ax25/mheard/mheard.dat and it is a zero-length file. I think ax25 is otherw

Our club is looking at different options for this year's Field Day since we have no intention of collecting at our usual 3A campsite. Most of us will probably be operating from home using our own call

I am looking for some more formalized End-User Directions to keep on the thumb drive, and print for the Go Bag/Box. What I am looking for is how to swap ports from 0 to 1 should the port 0 fail on the

Hi Basil, Just when I thought everything was pretty stable, I started to get protests from xastir that my GPS wasn't behaving. Dropped out of xastir and ran gpsmon only receive a blank stare... Unfort

I have just completed a new and clean install of NWDR15 due to some strange IPtable issues which seem to be resolved now. Attached are outputs from commands used in VERIFY_CONFIG.md It appears everyth

Has anybody had any success with setting up and getting operational with a Icom 706 series? I'm having some headway made with limited CAT control but no PTT. Anyone have a work around getting PTT oper

After sitting idle for a bit, I opted to move up from NWDR07 to NWDR15 using a Start From Scratch approach. I am using a Pi 3. After I boot and follow the first steps offered by the OS and then reboot

I got NQDR15 to load and configured so that it returns all the values noted in the Wiki (Confirm Install). YAAC icon worked and let me start setting up. Xastir icon just "sits there" after double clic

I originally purchased a DRAWS last April, played with it a bit and had some trouble, got busy so set it aside and hadn’t touched it until a couple of days ago when I started working with a a little b

Well, I though t it was working fine, but after rebooting now nothing works, aplay -l no li=longer lists the draws, I am attaching the the showudrc script output for more information. login as: pi pi@

Addendum to my last question Why no transmit? ~/n7nix/debug $ ax25-status -d AX25 Debug Status == failed & loaded but inactive units== 0 loaded units listed. To show all installed unit files use 'syst

My shack in the basement. I only have two, 16x28 windows. Both have very, very limited view of sky. What GPS extender do you recommend and why? Or could I put an SMA bulkhead connector through the wal

Where can I find the PLU and Xastir setup and use instructions for our DRAWS? Xastir will start and I have entered the basic information. Now, how do I get it to see the DRAWS and start receiving? Sam

Any projected date for the shipment of the new Draws hats? Thanks

Does the DRAWS get its power from radio or do you still need USB Power to supply it via PI? Thank's Tim

John, Basil, Bryan, adopters, I am playing with setting up FreeDV (1.1). Anyone successfully done it with DRAWS yet? I can get it to begin to receive, then it appears to stutter to a halt. I will have

I figured that people might benefit from having a 'storage place' or 'starting place' for draws manager settings for SPECIFIC radios. I did a little digging and found how to modify the list through co

I have tried updating mu DRAWS but i still have WSJTX V2.1.0. Any help on how i can update it to V2.1.2?

I fear there are a few threads on this topic, but they are labeled random things. For the record. All transmit and receive in modes not using ax25 work just fine. ax25 reception/decoding works fine. a

Hello Friends. I have this setup on WSJT-X that came with the DRAWS Image (WSJT-X v2.0.1 7ddcb7) Radio Tab Audio Tab Rig: FT-450 Input plughw:CARD=udrc,DEV=0 Mono Serial Port /dev/ttyUSB0 Output plugh