Basil, I have recently returned to working with DRAWS and RPi. In earlier image versions I had been able to load XASTIR (via the desktop icon) without any issues. With version 15 I am unable to load X

As a followup to setting up PAT with the DRAWS.... Is the ARDOP install that comes with teh DRAWS Compass package "installed" and available to PAT once PAT is installed? I ask because I see ARDOP avai

First I would like to say, thanks to the documentation and how to videos spread throughout the inter-tubes I have my DRAWS setup mostly working. A continual problem I have is the GPS...and it might ev

Hi All, So being in quarantine I have some extra time on my hands. I took on DummyRepeater and made it work with DRAWS. In the mean time I fixed some issues like resources not always being released or

Basil, I edited axport file here is the current output from Showudrc showudrc.sh ==== Sound Card ==== udrc card number line: card 0: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4

What does app_config.sh messenger do? I searched the WIKI without sucess. I ran app_config.sh without any parameters and it shows command line Usage: app_config.sh [-d][-h][core][plu][rmsgw][messanger

I was reading Michael Sharp's messages where he also indicates no transmit. Perhaps I too have a bad board, Is there any way to identify the units with the issue? Serial #, specific parts etc? Other R

For several weeks I’ve been fiddling with various schemes to backup and duplicate an RPi SD card using my Mac. I tried several approaches from websites using the Terminal and they were all slow and fa

What could prevent transmitting with DRAWS Hat running NWDR15 on Pi3 B+ ? /home/pi/n7nix/debug# ./btest.sh -P udr0 Send a message beacon Sent: /usr/local/sbin/beacon -c KO4BCZ-11 -d 'APUDR1 via WIDE1-

Hello all, I am beta-testing a new cable from HamMadeParts. I have the cable connected from the DRAWs Hat to the G90 ACC port. After some considerable configuration, I finally got it mostly working. H

If and when will we see these manuals online? My DRAWS should arrive next Monday and just wanted to read up. Lynn KB3FN

To All, This afternoon I downloaded NW15 and then ran the script for updates and fixes. ie. To get fixes and updated apps: cd cd n7nix git pull cd config ./bin_refresh.sh When I finished running the "

Basil, All, Did I miss a posting about this? Had trouble getting XASTIR to load following the install and configure checklist/instructions in the group Wiki. I finally got a chance (well, was forced b

Hi. Im have set up my DRAWS hat/FT817 according to "temporarily Offline" youtube video. Install good WSJT-X good CAT good\ - PTT band change etc. RX good - waterfall/decode etc great. I set my WSJT-X

Greetings Basil N7NIX, If things go right tomorrow, I might try installing URONODE on the image NW15. I really would like to figure out how to run the nodesearch plugin. Any advice would be appreciate

Hello- I have an unused DRAWS with a Pi3 and DRAWS image in orig USPS box and packaging. This has 2 radio cables and GPS antenna. I really do not have the time or ability at this point to use it so I

I am going to make some cables, starting with CAT control. What pins on the L/R mini dins are for cat levels plaese? I will keep struggling with the software at a later stage. It is all very muddy, as

I guess i am on my own then..... -- MY GMAIL desktop Email accoount, JF McRae, VK5PO/VK5SIX

Hi guys. I have connected a power supply to the draws hat, but when I switch the supply on, the Pi does not 'start'. the cooling fans are working, I see the GREEN LED on the Pi illuminated continually

I am finally having some success with my Pi 4b I ended up not using the NWDIG .img So, having gotten fldigi working ok, Including CAT ctrl I now need to ONLY INSTALL draws lib components to utilise th