|
Keying FreeDV with GPIO 2 messages
#draws
#freedv
John, Basil, Bryan, adopters, I am playing with setting up FreeDV (1.1). Anyone successfully done it with DRAWS yet? I can get it to begin to receive, then it appears to stutter to a halt. I will have
John, Basil, Bryan, adopters, I am playing with setting up FreeDV (1.1). Anyone successfully done it with DRAWS yet? I can get it to begin to receive, then it appears to stutter to a halt. I will have
|
By Jack Spitznagel
·
|
|
Draws manager - 'successful' configurations 4 messages
#drawsmanager
#draws-manager
I figured that people might benefit from having a 'storage place' or 'starting place' for draws manager settings for SPECIFIC radios. I did a little digging and found how to modify the list through co
I figured that people might benefit from having a 'storage place' or 'starting place' for draws manager settings for SPECIFIC radios. I did a little digging and found how to modify the list through co
|
By Art - KC7SDA
·
|
|
Update WSJTX 4 messages
#draws
#wsjt-x
I have tried updating mu DRAWS but i still have WSJTX V2.1.0. Any help on how i can update it to V2.1.2?
I have tried updating mu DRAWS but i still have WSJTX V2.1.0. Any help on how i can update it to V2.1.2?
|
By Justin Clark (KJ7JC)
·
|
|
ax25 transmitting but output is incorrect apparently so no connection 10 messages
I fear there are a few threads on this topic, but they are labeled random things. For the record. All transmit and receive in modes not using ax25 work just fine. ax25 reception/decoding works fine. a
I fear there are a few threads on this topic, but they are labeled random things. For the record. All transmit and receive in modes not using ax25 work just fine. ax25 reception/decoding works fine. a
|
By Mike B
·
|
|
UDRCII with RT Systems Cable for CAT Control & mini 6DIN and Yaesu FT-450D --PTT engaged but 0 Watts transmitted 4 messages
#wsjt-x
#ft-8
Hello Friends. I have this setup on WSJT-X that came with the DRAWS Image (WSJT-X v2.0.1 7ddcb7) Radio Tab Audio Tab Rig: FT-450 Input plughw:CARD=udrc,DEV=0 Mono Serial Port /dev/ttyUSB0 Output plugh
Hello Friends. I have this setup on WSJT-X that came with the DRAWS Image (WSJT-X v2.0.1 7ddcb7) Radio Tab Audio Tab Rig: FT-450 Input plughw:CARD=udrc,DEV=0 Mono Serial Port /dev/ttyUSB0 Output plugh
|
By TG9AOR
·
|
|
PAT with DRAWS on VHF 10 messages
I can not find the PAT CONFIGURE setup for ax25 VHF ports. I had ax25 started and when I attempted a packet connection the error message said that a ax25 port was not found. What do I need to change i
I can not find the PAT CONFIGURE setup for ax25 VHF ports. I had ax25 started and when I attempted a packet connection the error message said that a ax25 port was not found. What do I need to change i
|
By Dave Christensen
·
|
|
Compass image V15, XASTIR, Missing Library? 5 messages
Basil, I have recently returned to working with DRAWS and RPi. In earlier image versions I had been able to load XASTIR (via the desktop icon) without any issues. With version 15 I am unable to load X
Basil, I have recently returned to working with DRAWS and RPi. In earlier image versions I had been able to load XASTIR (via the desktop icon) without any issues. With version 15 I am unable to load X
|
By jgindc1@...
·
|
|
Setting Up AARDOP with the 8 messages
#draws
As a followup to setting up PAT with the DRAWS.... Is the ARDOP install that comes with teh DRAWS Compass package "installed" and available to PAT once PAT is installed? I ask because I see ARDOP avai
As a followup to setting up PAT with the DRAWS.... Is the ARDOP install that comes with teh DRAWS Compass package "installed" and available to PAT once PAT is installed? I ask because I see ARDOP avai
|
By Ed Bloom, KD9FRQ
·
|
|
RTC time: n/a 4 messages
First I would like to say, thanks to the documentation and how to videos spread throughout the inter-tubes I have my DRAWS setup mostly working. A continual problem I have is the GPS...and it might ev
First I would like to say, thanks to the documentation and how to videos spread throughout the inter-tubes I have my DRAWS setup mostly working. A continual problem I have is the GPS...and it might ev
|
By Mike B
·
|
|
DummyRepeater for DRAWS
#dtarrepeater
#dummyrepeater
#draws
Hi All, So being in quarantine I have some extra time on my hands. I took on DummyRepeater and made it work with DRAWS. In the mean time I fixed some issues like resources not always being released or
Hi All, So being in quarantine I have some extra time on my hands. I took on DummyRepeater and made it work with DRAWS. In the mean time I fixed some issues like resources not always being released or
|
By Geoffrey Merck
·
|
|
#draws
#draws
Basil, I edited axport file here is the current output from Showudrc showudrc.sh ==== Sound Card ==== udrc card number line: card 0: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4
Basil, I edited axport file here is the current output from Showudrc showudrc.sh ==== Sound Card ==== udrc card number line: card 0: udrc [udrc], device 0: bcm2835-i2s-tlv320aic32x4-hifi tlv320aic32x4
|
By Paul Noa
·
|
|
app_config.sh 2 messages
What does app_config.sh messenger do? I searched the WIKI without sucess. I ran app_config.sh without any parameters and it shows command line Usage: app_config.sh [-d][-h][core][plu][rmsgw][messanger
What does app_config.sh messenger do? I searched the WIKI without sucess. I ran app_config.sh without any parameters and it shows command line Usage: app_config.sh [-d][-h][core][plu][rmsgw][messanger
|
By
J P Watters
·
|
|
No Transmit
#draws
I was reading Michael Sharp's messages where he also indicates no transmit. Perhaps I too have a bad board, Is there any way to identify the units with the issue? Serial #, specific parts etc? Other R
I was reading Michael Sharp's messages where he also indicates no transmit. Perhaps I too have a bad board, Is there any way to identify the units with the issue? Serial #, specific parts etc? Other R
|
By Paul Noa
·
|
|
Easy and fast way for Mac users to backup/restore their RPi SD card 5 messages
For several weeks I’ve been fiddling with various schemes to backup and duplicate an RPi SD card using my Mac. I tried several approaches from websites using the Terminal and they were all slow and fa
For several weeks I’ve been fiddling with various schemes to backup and duplicate an RPi SD card using my Mac. I tried several approaches from websites using the Terminal and they were all slow and fa
|
By Brian K7BLS
·
|
|
#draws
#draws
What could prevent transmitting with DRAWS Hat running NWDR15 on Pi3 B+ ? /home/pi/n7nix/debug# ./btest.sh -P udr0 Send a message beacon Sent: /usr/local/sbin/beacon -c KO4BCZ-11 -d 'APUDR1 via WIDE1-
What could prevent transmitting with DRAWS Hat running NWDR15 on Pi3 B+ ? /home/pi/n7nix/debug# ./btest.sh -P udr0 Send a message beacon Sent: /usr/local/sbin/beacon -c KO4BCZ-11 -d 'APUDR1 via WIDE1-
|
By Paul Noa
·
|
|
G90 / HamMadeParts Cable / FLDigi 13 messages
Hello all, I am beta-testing a new cable from HamMadeParts. I have the cable connected from the DRAWs Hat to the G90 ACC port. After some considerable configuration, I finally got it mostly working. H
Hello all, I am beta-testing a new cable from HamMadeParts. I have the cable connected from the DRAWs Hat to the G90 ACC port. After some considerable configuration, I finally got it mostly working. H
|
By Michael Sharp
·
|
|
DRAWS Setup ans Operational Manual? 3 messages
#draws
#setup
If and when will we see these manuals online? My DRAWS should arrive next Monday and just wanted to read up. Lynn KB3FN
If and when will we see these manuals online? My DRAWS should arrive next Monday and just wanted to read up. Lynn KB3FN
|
By Lynn DeHart
·
|
|
AX.25 Desktop Icons 8 messages
#a25
To All, This afternoon I downloaded NW15 and then ran the script for updates and fixes. ie. To get fixes and updated apps: cd cd n7nix git pull cd config ./bin_refresh.sh When I finished running the "
To All, This afternoon I downloaded NW15 and then ran the script for updates and fixes. ie. To get fixes and updated apps: cd cd n7nix git pull cd config ./bin_refresh.sh When I finished running the "
|
By
J P Watters
·
|
|
DRAWS Image 15 and Xastir 17 messages
Basil, All, Did I miss a posting about this? Had trouble getting XASTIR to load following the install and configure checklist/instructions in the group Wiki. I finally got a chance (well, was forced b
Basil, All, Did I miss a posting about this? Had trouble getting XASTIR to load following the install and configure checklist/instructions in the group Wiki. I finally got a chance (well, was forced b
|
By Jack Spitznagel
·
|
|
DRAWS FT817 no TX audio 13 messages
Hi. Im have set up my DRAWS hat/FT817 according to "temporarily Offline" youtube video. Install good WSJT-X good CAT good\ - PTT band change etc. RX good - waterfall/decode etc great. I set my WSJT-X
Hi. Im have set up my DRAWS hat/FT817 according to "temporarily Offline" youtube video. Install good WSJT-X good CAT good\ - PTT band change etc. RX good - waterfall/decode etc great. I set my WSJT-X
|
By Ken Myers
·
|