Hi, Not sure this list is still alive. Due to issues with partially broken libraries in Compass image I decided to burn Buster distro on a RPi 3B with DRAWS HAT. The system is doing well but DRAWS is

DRAWS image Beta13 I am getting output audio which undulates when using either FLDIGI or JS8Call (or even when just using the TUNE button in FLDIGI). Has anyone run across this? My draws-manager has t

Hello, I made a mistake, this is not made for me, I can't get anything to work with it, it's not made for me so I'm selling it. 120€ with shipping. Just let me know if you're interested.

I was able to get it to write the image to the sd card. When i start the boot, it won't boot to login. The last line in the boot process is [ 0.957101] ---[ end Kernel panic: not syncing: VFS: Unable

For those that want to just download an image for their DRAWS setup - here is an image that should work on Pi3 or Pi4 based on Buster. It uses the DRAWS drivers that NW Digital submitted to the Raspbi

I'm going to ask again about the early adopter aluminum case. I know you'll just say "Refer to the Blog" but since the last entry on the blog about the case is June 5, I think it's about time for this

I'm interested in using DRAWS to drive my FT-818ND for digital applications up in the microwave bands Eg. 904, 1296, 2304 MHz, etc (FT8, JS8CALL, etc) as well as a precise frequency reference for my L

KM4ACK, Do you have any suggestions on the IP Address for PAT with the DRAWS. When I enter 0.0.0.0 I get an error when starting PAT (address already in use). When I enter 0.0.0.0:8080 in the browser,

DRAWS™ Manager does not need to run all of the time. It is a setup tool, then you can shut it down. sudo systemctl stop draws-manager and to prevent it starting up on next reboot sudo systemctl disabl

Has anyone gotten Allstar running with DRAWS (or UDRC)? I saw the thread re: URI but my aim is to use DRAWS rather than URI. -christopher. 73 de AI6KG

I just received my DRAWS and at this point in time, I am only interested in getting the GPS working. (I'm developing a new ThumbDV app for D-Star Routing and linking and want to use the GPS to update

Has anyone setup PAT via DRAWS??? I have not seen this but admit I may have missed it. 73s, Ed, KD9FRQ

I've been looking around the site and I see mention of a udrc-dkms (I'm assuming thats the audio driver file for the udrc) my question is there a repository somewhere that I could add to, say, raspbia

I've been trying to get my Raspberry Pi 3 working with my DRAWS hat but I think either my connection is messed up or my audio setup / levels wrong. I think Im doing something wrong I have used the dra

Hi all, Not sure if this is the correct group, mods: please feel free to move this to another group if it belongs there ! LA9KOA Karl and I have started using our DRAWS on a Raspberry Pi 4. As of now

Hello, I am attempting to connect a Xiegu G90 to the DRAWS Hat. I am using a custom made cable from Ham Made Parts. Using my oscilloscope, I can definitely confirm that there is audio coming from the

The NW Digital Radio team will be attending the Digital Summer Gathering this weekend. Email service at the camp is very limited. Requests for support, either technical or sales, will likely not be re

I bought an early adopter DRAWS many months ago, paid for the early-adopter AL case at beginning of May, still don't have any word on the case. Anything??? You got my money! August KG7BZ

I am happy to report that after many frustrating evenings puzzling out the setup of my first generation DRAWS hat I made a contact! PSK31, FLDIGI 4.1.03, Alinco DX70TH, T2FD antenna, homebuilt cable.

Hi everyone. Just wanted to share that I was able to get digipeated this morning via satellite "AISAT-1" as it passed over the U.S. East Coast. With an FT-857d connected to the DRAWS & up/down freqs b