I'm working on getting direwolf to run, and I find a bunch of instances of the file in various places - none of which is in /home/pi - which one is the one that I should be using? Charlie

I'm gonna have a million questions, I apologize right up front for that. I will stipulate to ignorance, no question about it. Just help me to understand, and when the light bulb finally comes on I'll

Setup a DRAWS as a RMSGW. It works nicely for WINLINK Digipeater Clients. Is there any guidance to install LINBPQ to provide NODE, CHAT and BBS to use the existing RMSGW instance of Direwolf Currently

Any update for customers that have been patiently waiting for cases we’ve paid for over 2 years ago?

Haven't seen this posted anywhere so I figured I'd ask here. I have a couple of large (200 GB) SDXC cards I could dedicate to this project. However, I read in the documentation that the minimum size i

Today I did an apt-get update and apt-get upgrade and low and behold, the UDRC has returned. Bob AF9W pi@af9w-bpq:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: udrc [udrc], device 0

Hello All, DRAWS Has an on-board ADC to monitor the 12V supply. Sometime after the first run, 5V monitoring was added, but the config file wasn't updated so the sensors command doesn't work correctly.

I am struggling to send email peer to peer where the end station is using PC based WinLink and only has the call sign AB9DEF without the -10. wl2kax25 -c WA9APQ?? This returns : connect(): Address alr

Peer to Peer receive is not activating when an inbound request it received. I see it in a terminal window using the listen command. What do I need to change to receive inbound Peer to Peer? Ed Bloom,

New post on NW Digital Radio DRAWS Shipping Status: by k7udr As of today all backorders have been filled on DRAWS Boards. We now have 30 boards IN STOCK! We have started a new run so we should have st

I am able to send to any RMS Gateway station I can hear and at the same time any mail for me is picked up. Ed Bloom, KD9FRQ ewbloom@... Sent from Webmail access

How do I expand the command below to send to CALL-10 via my local digipeater through a second digitpeater? wl2kax25 -c CALL-10 In "packet" land, the command is : wl2kax25 -c DIGI-1 DIGI-2 CALL-10 I al

Tue, Jul 14 at 5:09 PM I have just installed my draws hat with the your latest image from your directions and I can not find the correct sound card settings for the draws and any ham radio program. Wh

Before updating to the latest image and now, since updating, my Winlink Gateway is working properly, folks can get into it and upload/download their messages. The one part that isn't working is that I

My trusty crusty TM-D700 finally gave up and I wanted to build a new mobile rig based around an FT-897 that hasn’t seen much use since upgrading my home station. Going through the parts bin I found my

Hey all, I have started with a fresh install of nwdr16. I am following this: https://nw-digital-radio.groups.io/g/udrc/wiki/8949 and I'm in the "Test Transmit" phase - so far everything works. I have

Hi, Ran through the following and now the PI won't boot. Does not even appear to try. This is a PI 3. I did enable the HDMI Safe flag just in case it would help. sudo apt-get update sudo apt-get dist-

I have been using my original UDRC and direwolf for a long time as one of the ports on my bpq32 node. A while back the SD card on that Pi went belly up so I rebuilt the system from scratch using the c

The Pi has Bluetooth and WiFi. Is there a way to have PAT send a notification that "I've Got Mail" if there is a new message received via wl2kax25 command? 73s, Ed, KD9FRQ

Hi All and Happy New Year. Basil, I believe I read on here somewhere that you were working on the split-channel operation of the Draws and making so that you could do HF and APRS/Packet with two diffe