Overview
The UDRC™ can be powered directly by a 12 VDC source.
When powering via 12 VDC, the UDRC™ will also power the attached Raspberry Pi 2 or 3.
Connections
Apply 9-15 VDC, fused at 2-3A to either the HD-15 connector or to the designated pads on the circuit board.
HD15 Connector
Pin 10 GND
Pin 15 +12VDC
16 Pad Field
Pin 16 GND
Pin 15 +12VDC
Illustration
Observe the location of the pads for connecting power.
NW Digital Radio is in the process of setting up various community groups at Groups.io Please create a personal account at Groups.io Join the main NW Digital group by sending an email from your registered email account to main+subscribe@nw-digital-radio.groups.io and then send an email to udrc+subscribe@nw-digital-radio.groups.io Please use the group for questions and to share your experiences, so that all UDRC™ users can benefit from the replies.