ircDDBGateway Configuration using ircddbgatewayconfig
This example is on Compass Linux for the UDRC as dstarrepeater 1
Install ircddbgateway (GUI) and ircddbgatewayd (daemon)
sudo apt-get update
sudo apt-get install ircddbgateway ircddbgatewayd
This install will also install ircddbgatewayconfig
Start the ircddbgatewayconfig tool in a terminal
It may take a long time to startup, perhaps 2 minutes.
The ircddbgatewayconfig tool has a series of tabs
Set the Callsign to the callsign you have registered at ircDDB.net or to your callsign if you do not have a registration.
Setting the Local HB Address to 0.0.0.0 will cause ircddbgateway to listen on all IPv4 addresses on the computer. This is useful if you have other repeaters at different IP addresses. If all repeaters are attached to the same computer, then use 127.0.0.1. Leave the Local HB Port at the default 20010. The Icom settings should be left as set, in case you have an Icom ID-RP2C attached, now or in the future.
Repeater 1 - 1st Tab
Leave the Address at 127.0.0.1 for a dstarrepeater (UDRC) that is on the same computer. The Port is the UDP port the dstarrepeater is configured to listen on, the default for the first repeater is 20011. Leave the port at the default unless you have more than one device attached. The IP address and port may need to be changed if you have additional repeaters attached to the gateway.
You may also set a default Reflector and whether to connect at Startup and whether to Reconnect after a period of inactivity or to stay continuously linked to a fixed reflector.
Repeater 1 - 2nd Tab
This tab is self explanatory.
Follow the same steps for additional repeaters. Note how a different IP address can be used if the dstarrepeater (UDRC or Other) is on the LAN or even over the Internet.
If this repeater was on the same computer, the Address would be 127.0.0.1 and at a different UDP port, like 20012.
A Repeater on an Icom ID-RP2D
ircDDB Network Setup
For ircDDB.net registered gateways, enable ircDDB, select the server Hostname (Group2-irc in the Americas, Group1-irc for the rest of the world). Along with the Username and Password from your registration.
For unregistered gateways, enable ircDDB, select the server Hostname (rr.openquad.net).and your callsign as the Username. Leave the Password empty.
You can be connected to both networks.
Enable DPRS Reporting
Enable and put in an APRS-IS Hostname and Port.
This is for XRF reflectors and gateway to gateway linking as well as AMBE device (ThumbDV/PiDV/...) connections.
This will connect to REF reflectors as a hotspot style connection, as well as gateway and AMBE device connections. The Login is a US Trust registered callsign, use your personal callsign if you don't have a club callsign registered as a user.
This allows connection to DCS reflectors and initiating CCS links. Select a CCS Server
Enable Remote Control
Select a Password and UDP Port. This allows remote control of the gateway through programs including applications for the iPhone and Android.
Select your preferred Language and various functions.
Save and Exit
Save your configuration, which is stored in a file at /etc/opendv/ircddbgateway in Compass Linux. Exit the program.
Setup Port Forwarding
Jim Moen, K6JM has put together a good list of ports needing forwarded from your router to the Gateway.
Startup ircDDBGateway as a daemon
Startup the daemon, observer the log.
sudo systemctl start ircddbgatewayd
sudo tail -f /var/log/opendv/ircddbgatewayd.log
Once you are satisfied all is working, setup ircddbgatewayd to automatically start on boot up.
sudo systemctl start ircddbgatewayd
sudo systemctl enable ircddbgatewayd
Reboot and verify that ircddbgatewayd is running
sudo systemctl status ircddbgatewd
This Wiki page is offered as a courtesy of NW Digital Radio, technical support for ircddbgateway is on Yahoo!