Last edited · 8 revisions  

 


Overview

The UDRC™ can be powered directly by a 12 VDC source.

When powering via 12 VDC, the UDRC™ will also power the attached Raspberry Pi 2 or 3.

Connections

Apply 9-15 VDC, fused at 2-3A to either the HD-15 connector or to the designated pads on the circuit board.  

HD15 Connector

Pin 10 GND

Pin 15 +12VDC

16 Pad Field

Pin 16 GND

Pin 15 +12VDC

Illustration

Observe the location of the pads for connecting power.

UDRC™ Illustration Courtesy of WB7FHC

Video Demonstrating How to Install A Connector

By WB7FHC
On YouTube